All individuals should be more than equipped to carry out DIY tasks around their homes if they receive just basic DIY training. This advice comes from AA Home Rescue, whose spacewoman said that even though there are limitations to the tasks a homeowner should expect to carry out themselves, there are simple DIY tasks which are within easy reach of all homeowners.

Such tasks include the repairing of plasterwork, patching up cracks and holes, replacing tiles, basic plumbing tasks such as fixing leaking taps, hanging pictures using hooks, putting up shelves, decorating a bedroom by hanging wallpaper and painting walls and ceilings are all tasks individuals should be able to handle given some short instruction.

Although individuals are encouraged to have a go at the more basic of tasks, AA Home Rescue strongly advise the more complex jobs, such as those which require a professional qualification and may involve gas installation or domestic electrics, are best left to fully trained and qualified professionals. A gas system must only be worked on by someone who has undertaken a gas course and has gained their GasSafe qualification. In the same respect, only qualified electricians who are Part P qualified should work on any aspect of your household electrics.

Here at Access Training, we offer the perfect DIY trades training course which will give you the basic skills to carry out all manner of simple DIY tasks. Our short and friendly courses will help you discover the sense of satisfaction which can be gained from carrying out DIY tasks yourself, as well as helping you to save a considerable amount of money. It will also provide a valuable stepping stone if you are looking to progress onto more complicated tasks in the future.

Recent research reported by Wickes’ website shows that homeowners are spending nearly double the amount of money on improvements to their kitchen compared to any other area of their home. On average, out of every £100 spent on DIY and home improvements, £33 is spent directly or indirectly on the kitchen.

So why is this the case? Well, it could be attributed to the modern perception that the kitchen is the new centre point of the home. Many properties are now open plan in layout with most new apartment designs plan focusing around the kitchen as the social centre. With the use of the appropriate trade skills older houses such as the Victorian Terraces have also been adapted over the years to reflect the prominence of the kitchen. Traditionally the kitchen was hidden away at the back of the house, with separate reception rooms and dining rooms. Now these spaces have been knocked through, revealing the kitchen as the jewel in the crown. Kitchen designs have now become a statement area for home owners, encouraging an element of creativity to show off to family and friends.

Persimmon Homes believe they understand exactly what the modern homeowner is looking for:

“At Persimmon, we invest a great deal of time and effort into designing each and every room to ensure it suits the most demanding of lifestyles. Take our kitchens for example – the household appliances we include as standard, such as the fridge/freezer, dishwasher and washing machine, are becoming less about functionality and more about chic contemporary style. Along with the tough economic climate, as well as the rising popularity of shows such as Come Dine With Me, people’s desire to create the perfect ambience for dining at home is at the forefront of their minds.

Kitchen improvements can be a daunting prospect to individuals without the necessary trade skills. Those without the required knowhow should call upon expert trained kitchen fitters to carry out the work, as the fitting of units and worktops can become an expensive mistake if attempted without prior training. Access Training offer professional kitchen courses for individuals looking to increase their trade skills. Our range of DIY kitchen fitting courses will teach you everything you need to know to be able make all the improvements you require. Click on the links below to view our comprehensive kitchen fitting courses.

To improve your trade skills and learn all the necessary steps required to successfully improve or fit your own kitchen, contact Access Training today.

Now that the Conservative and Liberal Democratic coalition government has its feet firmly under the table, we wait with baited breath to witness the effects of cuts in government spending being made across the board. The cuts, although severe, don’t seem as though they will reach the rumoured 30 or 40 percent which sections of the press were reporting. We sincerely hope it stays this way so you can survive this period of uncertainty unscathed. 

However, there is a positive element to the cuts. The drive for public sector efficiencies aims to reduce red tape, helping to ease the cost of running a business. This will include the review of established regulations, which can only be good news for those individuals who are keen to set up their own businesses and become qualified and established self employed tradesmen.

One concerning aspect is the review currently being undertaken regards current Building Regulations, and in particular, the section which affects domestic electrical installations. An example of such a review includes the Approved Document P, or simply Part P, as most people will know it.  Phil Buckle, Director General of the Electrical Safety Council, spoke about the importance of attending electrical training, and particularly the appropriate electrical training to gain the all important Part P electrical qualifications: “It is the Electrical Safety Council’s View, that the removal of Part P would be detrimental to electrical safety.

“While we have an excellent safety record of fixed electrical installations in the UK, there are currently no controls in existence for those individuals wishing to undertake certain types of electrical work. It is feared that this could lead to an explosion in DIY projects, as the finances in many households are currently tight. This would negate the efforts of recent years to improve the safety of electrical installations in homes throughout the UK”.

The ESC has been made aware that certain unqualified individuals are having their electrical work ‘signed off’ by registered installers. It goes without saying that this practice represents a huge risk, and could easily lead to injury or even death. 

The conclusions we can draw are thus: if you are ‘Part P Qualified’ and are a registered Domestic Electrical Installer, or have become a registered member of a competent person scheme, the risks are yours if you decide to sign off any individual’s work. Take note: If an accident does occur, the Health and Safety Executive may well look to prosecute as it is deemed to be your responsibility under Part P of the Building Regulations.

Secondly, attending formal electrical training and becoming ‘Part P Qualified’ represents a worthwhile investment for anyone wishing to carry out electrical installations in homes. It is a legal requirement to do so, so don’t be one of the misguided few who persist in avoiding regulation.

Here at Access Training you can become Part P Qualified in no time at all. Just view our wide range of electrical training courses and choose the one which is most appropriate to the type of work you wish to carry out. What’s more, you can offset the cost of training against your tax bill; call us for more details.

In a stark warning from the UK’s building industry, there are currently not enough plumbers, electricians, gas engineers or the required skilled manpower to build and maintain the UK’s infrastructure

We have already mentioned in earlier posts the words of Di Johnson, president of the Electrical Contractors’ Association, who has voiced her concerns about the number of skilled trades people who will be available in the future.

She warned that the failure to invest now may result in a skills crisis, which would take the country years to recover from. Johnson aired her concerns: “there will come a time when we won’t have the skilled resources to deliver major infrastructure projects.

“I work in the electrical industry where the average age is around 45. This is largely the same across much of the craft sector, which means we could face serious problems in five years time as these skilled individuals start retiring from the profession, or look for a less physical office-based job… we simply will not have sufficient numbers to replace them. This will impact hugely on major infrastructure projects. If the nation’s bid to host the 2018 World Cup had been successful I would have had grave concerns about our ability to meet the deadlines.  

“Electrical, heating and ventilating professionals are the frontline troops responsible for delivering the sustainability agenda. These professionals can advise and properly install energy saving technology to ensure maximum efficiency. Without an increase of numbers in these sectors, we will not be able to hit the UK’s ambitious carbon reduction targets.”

Without a doubt, the time is nigh for any individual looking for a change in career to seriously examine the possibility of trades training. Whether you are interested in the electrical or plumbing industry, there are currently widespread opportunities available to those who receive trades training now. Whether they form their own business, or work for an employer, you will be able to secure your long term future, as well as that of the country.
 
To read in more depth the comments made by Di Johnson, please go to votlimum.co.uk. For further information regarding the trades training on offer here at Access, take a look at our plumbing, gas and electrical courses, and you could take great strides in the industry and fulfil your ambitions.

We are regularly asked various questions regarding the two City & Guilds Inspection and Testing Courses, as there seems to be some confusion as to exactly what each course entails. Access Training is here to clear this up:

• I want to inspect & test but which qualification do I need?
• What’s the difference between the City & Guilds 2391-10 and the City & Guilds 2392-10?
• I have some basic experience of inspection and testing but I want to be able to issue Landlord Certificates, so which qualification is best for me?
• Do I have enough experience to undertake the inspection and testing qualifications?
• What does the 2392-10 qualification qualify me to do?

By way of general advice, we will now endeavour to outline these two important City & Guilds qualifications, which are appropriate for electricians, inspectors and other persons requiring training and qualifications in inspection and testing.

The two City & Guilds qualifications relating to electrical installations are:

The 2392-10 City & Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification.

The 2391-10 City & Guilds Level 3 Certificate in Inspection, Testing and Certification of Electrical Installations.

Firstly you will notice the words highlighted in bold above; these show the subtle differences in the courses which are often missed. What becomes immediately clear is that one of the courses directly leads to the other; let’s elaborate on that point further:

The first qualification, the 2392-10, is a level 2 electrical qualification, which was developed to meet the needs of the electrical industry and for electrical training centres as a means of introducing students to the basics. It is also the perfect course to serve electricians, giving them the very best possible chance when naturally progressing onto the 2391-10. This is the qualification, which after completion allows you to ‘certify electrical installations’. The 2392-10 alone does not certify you to do this.

However, the main reason for this course being introduced was that the pass rate for the 2391 full inspection and testing examination was only around 40%, as many found the leap in understanding to be too great. Directly compare this to Access Training’s students pass rate of 72% for the 2391-10, if they have previously attended the 2392-10.

This proves that by passing the Fundamentals of Inspection and Testing in the first instance, your chances of achieving the lucrative 2391 Inspection and Testing qualification are nearly doubled!

In summary, the 2392-10 is suitable for those with limited experience or those with only basic prior knowledge of electrical principles (as taught on Access Training’s Professional Electrical Course and Advanced Electrical Course), and is a purpose designed lead-in to the full City and Guilds 2391-10 Inspection and Testing, giving you a much greater chance of successfully achieving the qualification.

The second qualification is the full name for City & Guilds 2391-10 Inspection & Testing qualification, which is the one you ultimately want to achieve. It is a more advanced electrical course and is a qualification which allows you to test and inspect domestic, commercial and industrial electrical installations – in layman’s terms, issuing Landlord Certificates.

As City & Guilds states, it is a Level 3 electrical course, and therefore has a relatively high degree of difficulty. Some practicing electricians make a concerted effort to avoid this qualification due to its infamy! Enquire about our course and we’ll explain why these fears can be easily allayed. 

To surmise, our advice is simple: unless you are fully aware of the level of expertise involved with achieving the 2391-10 Inspection & Testing qualification, or have previous extensive experience of inspection & testing practices, then you should achieve the 2392-10 Fundamentals of Inspection & Testing first. Although the 2392-10 doesn’t allow you to carry out any specific work as such, it dramatically increases your chances of passing the 2391-10, leading to a far better understanding of the inspection and testing process.

For specific information on the courses discussed in this article, click on the links below or call Access Training now on 0800 345 7492.

The 2392-10 City & Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification.

The 2391-10 City & Guilds Level 3 Certificate in Inspection, Testing and Certification of Electrical Installations.

If you are reading this post you are doubtless aware of the continuing debate surrounding the future of Part P and whether or not it is sufficient to meet the demands of the electrical industry, and more importantly, of the general public.

Electricians across the spectrum seem to be divided about its effectiveness, unable to agree as to whether the current electrical building regulations go far enough, or simply create a vacuum within the industry. Since the coalition government took power the regulations have been caught up in the political undercurrents which have been circulating a number of government departments.

The debate will certainly go on, but the merits of Part P of the building regulations received a ringing endorsement last month from comments made by Phil Buckle, Director General of Electrical Safety Council, who said, “I certainly agree Part P has not been seen as the electrician’s friend, but it has certainly brought about benefits for the consumer.

“As a contributing factor towards improved safety, the Council will continue to lobby Westminster for its retention. We have also made our support for Part P clear at the party conferences held in the autumn of 2010. We have already sent comments to the Minister, Andrew Stunell, as part of an initial review of the building regulations. Our entire raison d’être [at the Electrical Safety Council] is to ensure the safety of all users of electricity. It would not be acceptable to the ESC if we were to allow a vacuum whereby untrained individuals could undertake electrical work without checks – this would surely be the case if Part P were scrapped.”

There seems little doubt that with the might of the Electrical Safety Council behind it, and in conjunction with associated bodies such as the NICEIC, Part P will remain in place, continuing to protect the general public from the dangers of unchecked electrical work in domestic properties.

If you’re an electrician or tradesperson undertaking electrical work in a domestic environment, it is essential to ensure your conformation with Part P of the building regulations. We would also highly recommend joining a Competent Person Scheme such as the NICEIC.

If you would like to learn more about the Part P electrical courses offered by Access Training, or you’d like to know more about the NICEIC, call us today on 0800 345 7492.

In a previous news entry we discussed the confusion or lack of general awareness centring on the new Gas Safe Register, and the potential gas safety problems which can occur when you employ tradesmen who are not properly registered. In recent months, it has come to light that even more serious electrical problems are looming…

Back in January 2005, the government introduced new legislation regulating electrical installation work carried out in houses and gardens. This came after a number of electrical injuries (750) and deaths (10), which occurred as a direct result of poor electrical wiring. There existed a common misconception that electrical work could be carried out, without the relevant electrical training or expertise, within the home. These yearly figures are disturbing enough; however, add these to the 2,336 house fires caused by incorrect electrical installation and the picture painted becomes far more menacing.

There is a distinct lack of general awareness amongst the public, and disturbingly amongst trades people themselves. Part P of the building regulations explains why the dangers of electrical shocks from faulty electrical work are so widespread. As an example, in 2008, the Electrical Safety Council reported that a serious incident occurred when a woman was electrocuted following the redecoration of a room in her house. The woman received a fatal electrical shock when her decorator, who was not compliant with Part P of the regulations, replaced some electrical sockets with those of a different style. The woman was electrocuted when she picked up a metal lamp which had become live, whilst touching another lamp that was earthed. In this instance, despite the work not complying with Part P, the Crown Prosecution Service decided that there were no grounds to prosecute the decorator; however, the message is stark: you must comply with Part P and notify Building Control of your local authority when you carry out repairs, replacements, maintenance work or add extra power or lighting points to existing circuits. They will then send an inspector to assess the work and provide you with a certificate to confirm the work fully complies.

It is still possible to be registered to carry out electrical work without the need to inform Building Control, and still be compliant with Part P. This can be achieved by becoming a member of a competent person scheme, such as the NICEIC. A short electrical training course with us here at Access Training will teach you everything you need to know.  We can also put you in touch with the NICEIC to start the registration process as a domestic electrician. This will give kitchen fitters, carpenters, decorators, plumbers, plasterers, general builders and even keen DIYers the training and competence they need.

To find out more about the comprehensive Part P electrical courses we offer here at Access, call us today on 0800 345 7492. We can have you registered with the NCIEC in no time as a fully signed up member of the Competent Person Scheme.

Believe it or not, despite all the extensive media coverage at the time, many people are still unaware that the Corgi accreditation, which regulated the work carried out by gas fitters, has now been replaced by Gas Safe.

The Corgi Register changed to the Gas Safe Register back in September of 2008, after the HSE conducted a study which established the need for a new system to cope with the increase in the number of homes using gas in the UK (about 21 million). More importantly, it was designed to improve the statistics for death and injury resulting from gas installations. It was felt that a new Gas Safe Register would increase public awareness about the dangers of carbon monoxide poisoning.

Stephen Manley, an Inspector for the HSE, referred to the need for more people to be aware of the change from Corgi Registration to Gas Safe Registration: “It is illegal for an unregistered person to carry out work on a gas appliance. When unqualified workers try to bypass the law in this way they are not only putting themselves at risk of prosecution and a large fine, they are also putting their customers' lives at risk.

"Working with gas appliances requires a great deal of skill and knowledge, it is also potentially very dangerous. Only qualified and registered engineers should attempt it.

Paul Johnston, the Chief Executive of the Gas Safe Register, commented: "To fit, fix or service gas appliances… that person [needs to be] Gas Safe Registered [not Corgi Registered]. You shouldn't take any risks; badly fitted and poorly serviced gas appliances can cause fires, explosions, gas leaks and carbon monoxide poisoning".

So, if you are looking to become qualified as a gas fitter, you need to become Gas Safe Registered. Access Training offer the simplest way to get Gas Safe Registered quickly and safely; our gas training courses come with a guaranteed work placement with a reputable Gas Safe Registered company, giving you the skills and confidence to fit gas appliances safely. However, just remember that it’s the Gas Safe Register and not the Corgi Register you really need to be a part of.

For comprehensive training enabling you to become Gas Safe Registered, contact Access Training today on 0800 345 7492. We have an enormous range of industry accredited trades training courses, which will teach you everything you need to know.

There are expected to be in the region of 230,000 disappointed young people missing out on a university place this year, damaging their hopes for a rewarding job, and in their view, affecting their future earning ability.

But is this truly the case? What about the wealth of vocational training options available which can lead to an extremely rewarding and lucrative career?

Vocational courses lead to higher-paying jobs

The median salary for graduates is £23,000*, which compares poorly to the average salary for an electrician in the UK, which currently sits at £31,701*.

Vocational courses cost less than university courses

At time of writing, university fees stand at £3290 per year, rising to £9000 in a year’s time. That’s £27,000 for a three year course (without the inclusion of living expenses).

For that price you could gain dozens of industry-recognised vocational qualifications, including plumbing and electrical awards, as well as becoming Gas Safe qualified and registered, with bags of money remaining to buy your first van and all your tools!

There aren't enough university places to go around

To add to the strain for university places, these potential students are also coming under pressure from competition for places from the EU, with applications for places rising by 8% already this year. It stands to reason that with the much vilified 2012 rise in fees, many more applications are being received per place as an attempt to beat the price hike, but to what end?

The surge in applicants shows a further increase on the quarter of a million that applied for a university position last year, with one in three unable to gain a place.

However, this needn’t be the end of the world; in fact it can be the start of a whole new successful chapter of an individual’s life. Vocational alternatives such as plumbing, electrical and gas courses are readily available. The Government recently announced their intention to set up 40 new university technical colleges (UTCs); however, this news was lost amongst the furore of the tuition fee protests. Such careers are extremely worthy alternatives to a university education, especially given the current skills gap in the country (which has existed for decades).    

Even EAL, the organisation which awards vocational qualifications across sectors including plumbing, electrical and gas, has called for an end to what it rightly describes as snobbery against vocational courses.

Sally Hunt, General Secretary of the University and College Union, has said:

"Our Government seems intent on ignoring the global trend of increasing access to university, which will see thousands of applicants denied the chance to fulfil their potential."

However, Hunt doesn’t acknowledge that an individual’s potential can still be fulfilled through vocational courses.

So if you want to save your money, study for less time, and develop the technical ability and skill to earn many times what a graduate would expect to earn, all without the vast huge amounts of debt, a vocational course may be the way to go. We offer a variety of vocational courses here at Access Training - browse our latest training packages here.

*Sources: www.salarytrack.co.uk and www.mysalary.co.uk