An ex All-Black and Cardiff Blues captain, former rugby player Xavier Rush is currently training here at Access Training after retiring from sports and deciding to earn the qualifications to start a new career in property development. After completing an intenstive kitchen fitting course, he has decided to continue his training and earn additional qualifications in electrics and plumbing. We caught up with him again as he progressed through the professional electrician's course to see how he's getting on with starting his new life...

So how has your electrical training been going so far?

Busy, very busy! But good – I’ve been doing my Part P and 17th Edition, had an exam yesterday which I passed so I’m very happy about that. I wasn’t looking forward to doing a resit on Friday so I’m glad I’ve managed to avoid that. But it’s an intense course this one, and you don’t have much time to muck around. It’s intense, but its short and you get a lot of information which is great.

How have you found the balance between theory and practical learning?

You’re getting a good mix of both here. I think Martin [One of the electrical tutors] teaches it very well. I’ve enjoyed his style and the environment of working with all the other students as well. We come from all walks of life and backgrounds, but we’ve all got that one common goal of getting our qualifications. And we’re all here to learn, it’s very different to school – everyone’s here because they want to be here.

How has the electrical course compared to the kitchen fitting you were doing previously?

Kitchen fitting and carpentry is a lot more hands-on, which I’m more used to. The electrics is where you have to get the old brain working in gear. It’s been a while since I’ve had to sit in a classroom but again as I said Martin makes it interesting and mixes it up. And that’s helped us all.

Did you find you were fully prepared for the exams?

Well it’s a two and a half/three week course, so you’ve just got to make sure that you keep yourself pretty quiet over these weeks so at the end of it you get the pass mark. The first exam wasn’t bad at all but this one...it was an open book exam with the regs but it can be tricky. Its multiple choice (or multiple guess in some situations!) but I feel we covered it well in our teachings and you’ve just got to know your way around the book really.

We all passed in our class so we must have been fairly well prepared, especially when you never know what they’re going to chuck out at you. Every exam is different from everyone else’s.

So what will you be moving onto next?

I’m doing my PAT testing now, then have a nice week’s break and come back and nail my plumbing. I’m over the moon that I’m now a qualified domestic installer than can self-certify my own work. If you look at apprenticeships when I was finishing school that would have been a seven year course and even at the end you might not know as much as you’re given here. You’d have a fair bit of experience on the job but you’re in a good position to move on now and either do your own work if you feel confident enough or work for someone for a while before that.

Finally, what advice would you give to someone thinking of doing an electrical course or even completely changing careers like you have?

They need to remember that the courses are intense – you learn a lot of information so you want to make sure you go home, you get your sleep, your rest and your revision. Because you are slamming a lot of information into a small amount of time so you want to make sure you take in as much of it as possible. It’s a fun, enjoyable environment to learn in and the tutors. You’re learning from top guys so it’s been well worth the experience.

If you’ve wanted a career and want more of a hands-on trade and a change from what you’ve been doing I definitely recommend it. I certainly wouldn’t be here if I thought it was a waste of time. This is a great environment to come in and start.

We'll be catching up with Xavier Rush again after his week off, so if you have any questions you'd like to ask him please let us know via Twitter or Facebook. If you would like more information on taking the steps to change your career and become a professional tradesperson, please get in contact with one of our course advisers. Access Training offer courses in plumbing, electric, gas and construction (plastering, tiling, carpentry and painting & decoration) and they'd be happy to answer any questions. You can contact them on 088 345 7492.

The last few days have been a reminder that winter is well and truly here, with the temperature dropping and the country getting its first innings of both frost and snow. Even with energy bills on the rise, it's important to keep warm during this time of the year and make sure that your heating system is working properly. According to Government statistics, the 2012-13 winter period saw the largest excess mortality rate since 2008-09, with deaths coinciding with influenza, RSV and the cold weather.

The run-up to Christmas can be a busy time for plumbers and gas engineers, with consumers coming with all kinds of problems including broken down boilers and frozen pipes. For the tradespeople reading this it'll be good for business, but for the rest of us here is a few pieces of advice to keep away any unwanted costs as well as making sure your home stays warm.

The UK had a pretty good summer this year so it's likely that you haven't turned the heating on for a while, so it'll be good practice to check it regularly to make sure it's all in working order. Suddenly starting it up in a cold snap could result in it freezing up and potentially breaking down. Regular boiler checks by a professional plumber and gas engineer are important and should be done once a year, including servicing according to the manufacturer's instructions. Not doing so not only puts you at risk of forking out for repair costs, but in the case of gas boilers also puts you and your family at risk of possible carbon monoxide poisoning.

Another handy tip is to bleed your radiators. If you can feel cold patches on them it may be due to some air trapped inside that's blocking the system. It's easy to do and won't require the help of a plumber, but should that fail it might be blocked with something else. In this case the radiator might need a chemical flush and you will require a Gas Safe engineer to get the job done.

Most importantly, and this really goes for any sort of DIY maintenance work - KNOW YOUR LIMITS! If there's something you know that you can't do, don't try and do a botched job of it anyway as you'll end up having to pay even more to get it repaired properly.

----

With plumbers and gas engineers needed more than ever during these winter months, now if the perfect time to qualify as a plumber and/or gas engineer with an intensive Access Training course. We not only offer comprehensive training for beginners, but also ACS reassessment to those needing to give their qualifications an update. To find out more contact one of our course advisers on 0800 345 7492.

Although the general public are becoming more aware of the benefits of using LED lighting in their homes, adoption is still notably slow says a recent survey from Lamp Shop Online.

LED lighting has already proven itself to be a money saver, saving homeowners as little as £13.63 on their annual lighting bill. With the average household energy bill around £1,420 a year and 8% of that going on lighting every little helps. Even the business world can get a significant saving! A small office with only a handful of fluorescent tubes can save around £85.50 a year by switching to LED tubes, and this figure only goes up as the building gets larger.

However these reductions still don't seem like enough to get homeowners to see the light. Lamp Shop Online's survey found that although 72% of consumers know that LED lighting can be used in the home and 67% know they will reduce their energy bills, many still don’t know how to take the first step to install LED lighting as they are confused over what to search for online. Getting more information on what they need to do to make the switchover is clearly still the biggest obstacle, with 39% of respondents not sure what to put into a search engine to get the relevant results.

28% didn't even know that LED lighting could be used in the home at all, so a lack of information is also a large factor at work.

Neil Kennedy from Lamp Shop Online said he was "surprised" that consumers didn't know where to begin looking for the information available. "This survey shows there is a definite lack of practical information on purchase and installation and concrete statistics on the savings LEDs can offer. Simply put, the lighting industry is not making it easy for consumers to make the switch to LEDs," he said.

He went on to say that creating the survey was a demonstration of their committment to LED lighting, and would now use these results to help encourage more people to read up on and eventually adopt LED products.

More information can be found at www.lampshoponline.com

Via Electrical Contracting News

- Mark Jenkins

-----

Mark Jenkins is the Electrical Course Development Manager here at Access Training. If you would like to take the steps to become a professional electrician, our electrical training courses are the fastest and most effective way to build up the skills you need and gain the necessary qualifications for a prosperous career in the industry. To find out more give us a call on 0800 345 7492.

Now might just be the perfect time to make that career change and begin your construction training! Following on from the predictions that the construction industry will see a boom over the next four years, new survey results for quarter 3 2013 have found that the trade's recovery is well on the way.

The construction trade survey, compiled by the Construction Products Association using data from the Civil Engineering Contractors Association, Construction Products Association, Federation of Master Builders, National Federation of Builders, National Specialist Contractors Council and the UK Contractors Group, found that activity rose for the second consecutive quarter. This growth came from across all areas of the industry with even more anticipated in the next 12 months.

After five years of difficult conditions for the construction industry, optimism is now rising as building contractors were reported to be the most positive since pre-recession 2007. 30% of specialist contactors reported that enquiries for new work rose this quarter, as well as 30% of civil engineering firms reporting a rise in order books.

However despite this it isn't all good news just yet. Rising costs are becoming a key issue, with manufacturers reporting that costs have risen over the last year. As well as citing wages as the key factor, the rising price of fuel, energy and raw materials are also responsible.

There are two trades in particular that have had recruitment trouble - both of which we offer courses for here at Access. 34% of of firms reported difficulty recruiting bricklayers, while 32% also had a problem with plasterers. Both of these are the highest levels of difficulty reported since 2008, so those who may be considering plastering training or bricklaying courses have a clear gap in the market ahead of them. You can read more about the plastering and bricklaying courses we offer on the website.

Other key findings of the quarter three survey were:

• 43% of building contractors, on balance, stated that activity rose in Q3, the second highest balance since 2007
• Private new housing was the key driver of construction growth in Q3 with 22% of contractors, on balance, reporting that activity rose in Q3 compared with a year ago
• Building contractor new orders reached their highest level since 2007
• The most positive sector for new orders was public non-housing, which primarily covers education and health, with a balance of 9%
• 49% of building contractors reported that costs rose in Q3, with labour costs and materials costs both contributing to the rise
• A balance of 4% of building contractors reported that tender prices rose in Q3; however, with costs also rising, a balance of 11% reported that profit margins had continued to fall.

More information can be found via The Construction Index

---

If you would like to find out more about the construction training courses we offer here at Access, which including carpentry, tiling and painting & decorating as well as the aforementioned brickwork and plastering, please get in contact with us on 0800345 7492 and our course advisers will be happy to tell you more. With a variety of flexible courses that will give you the necessary construction qualifications, Access Training is the best method to get the required skills fast without skimping on any of the quality.

Carbon Monoxide Awareness week will be happening between the 18th and 24th of November and industry regulation OFTEC has joined in to urge homeowners to get their boilers checked by a registed technician before the cold winter months arrive in full.

While most associate carbon monoxide poisoning with faulty gas appliances (which received their own focus at the end of September as part of Gas Safety Week), the truth is all fossil fuels can give off the gas. According to statistics from the Department of Health, carbon monoxide poisoning is responible for more than 50 death and 4,000 people being admitted to A7E in the UK every year.

Malcolm Farrow, of OFTEC, comments: "The risk of carbon monoxide poisoning is significantly lower with oil-fired central heating but consumers should not be complacent. The key message is that in order to save lives, consumers should have their boilers checked annually by an OFTEC registered technician to make sure they are working properly. We also recommend homeowners install a carbon monoxide detector in their home.

"This is an important issue which we stress to our customers all year round. We want to do all we can to support national Carbon Monoxide Awareness Week and view a carbon monoxide detector as just as important to people’s safety as a smoke alarm – they really do save lives."

More information on carbon monoxide poisoning can be found at www.oilsave.co.uk or by phoning OFTEC on 0845 65 85 080.

Via Installer Magazine

According to new research commissioned by ADEY Professional Heating Solutions, installers and heating engineers might have a huge opportunity at their fingertips.

It seems that millions of homeowners across the UK are failing to maintain their central heating systems properly, resulting in not only a loss of efficiency but a reduced lifespan and an increase in the amount of energy needed to heat homes. Their research looked at more than 1300 homeowners across the UK, with only 55% of them confirming that they have their boiler serviced annually. One in 20 even said that they considered it an unneccesary expense!

ADEY also found that 45% of homeowners claim to have a boiler between 10 and 15 years old, with 25% who have lived in their current home for more than 15 years saying that they have never once had their boiler serviced. Furthermore, almost a third (30%) of homeowners have a problem with their central heating system, with one in 20 suffering from low heat levels. One in 10 people put up with noisy pipework in their homes – a common indicator of debris in the heating system – and 15% of people admitted they turn the thermostat up to try to fix their boiler, burning more fuel than necessary on a healthy heating system.

Consumer/environmental broadcaster Lucy Siegle said: "Boilers are the 'forgotten workhorses' of our homes. We expect them to carry on pumping away without any TLC, but homeowners need to understand that a well-maintained system costs less to run. This is where installers have a great opportunity to use their insider knowledge and help their customers counter rising energy bills by ensuring their heating systems work safely and efficiently."

ADEY’s commercial director Rebekah Howard added: "The results of our research suggest that many people don’t understand the benefits that having an annual boiler service will bring, and worryingly, just let their good old boiler in the corner keep chugging away without giving it any attention.

"The current climate presents installers with a timely opportunity to be telling customers how a well-maintained and efficient boiler can help save money on heating bills, reduce the risk of it breaking down when it’s cranked up to keep them warm, and ensure it’s safe to use. Installers can be assured that many of their customers will welcome this advice, as three quarters of homeowners surveyed wanted to know about the simple changes they can make to the central heating to reduce energy bills."

More findings from the search can be seen in the infographic below:

Via HVP Magazine

------

By becoming a qualified heating engineer, you too will be able to seize this opportunity for work. Not only that, but the life of a qualified plumber/engineer is varied, challenging and pays extremely well. You'll find yourself not only with a skill you'll have for the rest of your life, but a career that's never short of new work. But before any of this can happen, you'll need that right training and qualifications. Offering plumbing and gas engineer courses as both separate and combined packages, Access Training Academies is dedicated to helping students attain their goal of becoming professionally qualified, taking those first steps toward a brand new career. To find out more about how our courses can help you, contact one of our course advisers on 0800 345 7492 and book your place today!

A warning to homeowners of the risks involved in do-it-yourself electrical installations.

Napoleon once referred to Britain as 'a nation of shopkeepers'. Probably not true in modern society, but we still certainly a nation of something - do-it-yourselfers.

More and more people are willing to have a go at things they may have once thought impossible, taking regular visits to the local DIY shop to get parts for little jobs here and there or even working toward bigger projects such as renovating a room or building a conservatory. However, when it comes to plumbing, gas and electrical jobs, such concerns are better left to the professionals. Meaning those certified to carry out the work.

Jobs for an electrician

A homeowner can legally undertake basic electrical jobs themselves, such as installing an additional socket/light or connecting a cooker to an existing connection unit, but not much more than that. Anything more complicated like installing a new shower circuit or a new cooker circuit, legally requires a qualified electrician. If you have any DIY plans that require electrical work, it's always best to check what you are legally able to do before starting.

If you have any doubts on the legality or your capability to do the job safely in the first place, do NOT attempt it yourself and instead seek out the help of a qualified professional. Not only will you be ensuring that the job is done safely and properly, but you'll be saving yourself money in the long run. Hiring an electrician to fix a botched job usually ends up costing more than getting one out to do the job in the first place.

Building Regulations

District councils have responsibility for ensuring that any building works meet the national Building Regulations for efficiency, safety, design and disabled access. Building Regulations must be obtained from the local council before any structural alteration is made to a home. Such regulations are easier to obtain if the homeowner can prove they are going to be using a qualified electrician to undertake the work.

Part P qualified

A Part P qualified electrician is one who is able to sign off their own work in domestic properties. If they aren't qualified, then they'll have to approach the local authority building control to approve their work. This is something that all homeowners should bear in mind when they are looking to hire a qualified electrician.

Risks

It doesn't take much for electricity to kill. Forget numbers like 10,000 volts, the 230 volt domestic supply running through your home is more than enough. Our bodies use electrical signals to control our organs and any excess voltage will interfere with these, causing hearts and lungs to stop functioning and eventually death. Poorly installed electrics can very easily also start fires, resulting in home owners losing everything when their houses are burnt to the ground because of some faulty wiring. And if that work goes against building regulations, you may find the property is not insured and the insurance company is not legally obliged to reimburse them. On average, around 30 people die each year due to low voltage electrocutions and electrical burns. In addition, two and a half million people will receive a mains voltage electric shock every year, and 350,000 will receive a serious injury. Another 46 will die each year as an indirect result of faulty electrical wiring or the poor installation of electrical equipment.

Differing standards

The majority of contractors in the UK are reliable and are certified as such. To become a qualified electrician takes between three and five years of study. Some contractors may however pass themselves off as qualified, citing qualifications obtained in other EU countries. However, the standards in wiring differs across both the EU and the rest of the world, so what qualifies as a qualified electrician in one country is unlikely to be anywhere near the standard required in the UK.

Registers

To find an electrical contractor to undertake domestic tasks, the best place to start is often a register such as the Electrical Safety Register at www.electricalsafetyregister.com. Electricians who register with the Electrical Safety Register must meet a very high industry standard, which means that consumers who use an ESR registered contractor are guaranteed an exceptionally high standard of work. In addition, all work carried out by Electrical Safety Register contractors is guaranteed. Any deficiencies in the work carried out are resolved at no extra cost.

Kick out the Cowboys

Electricians with fake qualifications performing sub-standard work is a continuing problem in Britain. Despite their poor (and often dangerous) results, such workmen still expect to be paid for their work and can get heavy handed if refused, especially against the vulnerable. 
In an effort to show up shoddy workmanship, electrical wholesalers Gil-Lec has set up a Twitter campaign using the hashtag #KickOutCowboys. Anyone who provided poor electrical work can be named and shamed via the Twitter campaign. Twitter users are encouraged to post photographs of poor electrical work, coupled with the name of the individual or company who performed the work.

Via Electrical Contracting News

- Mark Jenkins

-----

Mark Jenkins is the Electrical Course Development Manager here at Access Training. If you would like to learn more about electrical work and maintenance, you might want to consider one of the many electrical training courses we offer. These are available for both DIY enthusiasts AND people looking to gain the vital qualifications needed to make the career change to become an electrician. To find out more give us a call on 0800 345 7492.

Organising a big home renovation project can be a really exciting thing, especially if you're already a DIY enthusiast. However it's also easy to get carried away and overestimate things, leaving you a bit stuck when it comes to actually carrying the work out. With that in mind, here is a selection of handy tips to avoid frustration and make sure you get it all right the first time.

Be realistic with your budget:

Before you start any of the work or gathering the tools and materials, it's wise to set an overall budget for your project. Try to account for everything as accurately as possible, that way you won't see that ballpark figure going up and up as the work goes on. One thing to always keep in mind is encountering unexpected issues along the way, so it might be a good idea to set aside some excess funds just in case of an emergency. Knowing your budget also makes sure you aren't getting in way too over your head either.

Don't skimp on the cost:

This might seem a little contradictory to the above, but the point here is to not settle for the cheapest materials on the market. Odds are these are the ones that won't stand the test of time, and you could find yourself having to do the work all over again sooner than you might think. Know the average price of the materials, what the best ones are to use and do a job that will be the best it possibly can.

Prepare the work properly:

For example, if you're painting a room, don't skip taping the surfaces you don't want to paint. Don't just assume you'll be 100% accurate the first time, because odds are you'll end up with paint splashes where you don't want them.

Make sure your measurements are accurate:

Avoid having unnecessary waste material, as not only is it a waste but it means you also may end up having to go out and buy more material when you didn't need it in the first place. There could even be worse repercussions to inaccurate measurements - imagine having custom kitchen cabinets made, only to find they're the wrong size when they arrive. Times like these the best advice is always "measure twice, cut once".

Use the right tools for the job:

If you're missing a tool needed for the job, don't try and improvise with a different, potentially unsuitable one. Either buy one or rent/borrow it, because not doing so goes hand in hand with our last bit of advice...

Safety ALWAYS comes first:

Even when keeping everything else in mind, this should always be your number one priority? Is your work really worth the risk of serious injury. Protection such as safety goggles, gloves and (in some cases) a hard hat should be a given, but if at ANY point you feel like you're out of your depth stop what you are doing and get a trained professional to complete the work. Even the best DIYers know their limits.

-----

If you have a home reburbishment in mind but lack to the skills to carry it out, or alternatively are looking into property development as a potential career path but lack the qualifications to make it happen - Access Training Academies are here to help! Offering training in various trades including electric, plumbing, gas, tiling, plastering, carpentry, brickwork and painting & decorating, you can attain the perfect skillset to cover any job properly. To find out more about our multi-skills courses and talk to one of our sales advisers, give Access a call on 0800 345 7492.