Asking this raises a number of other questions. The plumber may be capable of connecting cables to the shower but does he know how to check that the existing cable can take the load current of the new shower? Does he know how to carry out all the required electrical tests that are required when installing new electrical equipment? Does he have access to the required test equipment to allow him to perform the tests (this equipment is expensives - in the region of £600+, and usually only carried by qualified electricians)? If he has access, is it the right equipment? Is it manufactured to the revelent BS or EN standards? Has it been well maintained and regularly calibrated? Does he have and can correctly fill out the correct electrical test certificate for the job? Has he informed you that you will need to notify the local building authority control (any electrical installation work that has been carried out in a room containing a bath or shower has to be pre-notified as a requirement of Part P). Oh yes I nearly forgot - there is also a charge payable to the Building Control Authority to notify works under Part P!
Are you starting to wonder if the plumber is the man for the job? If you have any doubt whatsoever, no matter how small - get a "proper" electrician to do the work. One who has undergone training and experience in doing the work. Engaging an electrician who is a member of a recognised 'Competent Person Scheme' will save you the cost and hassle of dealing with the Building Control Authority.
Have you made your mind up yet?
- Mark Jenkins
Alternatively, would you like to have a go at this yourself? Considering a career change to become an electrician? Access Training offer a number of bespoke electrician courses to people of all ages and backgrounds, from professional qualifications to DIY courses. With qualifications including general installation, Part P training, PAT Testing and more, we're certain we have the right electrical course for you. For more information call us on 0800 345 7492.
When hiring a plumber or any other tradesperson, there are a number of things you should find out beforehand. Questions such as what kind of plumbing training they've had, their qualifications and previous experience are crucial when it comes to getting the best value for money.
The first and foremost way to find a reputable tradesman is to ask friends, family or other tradespeople for a recommendation. Others who can recommend a tradesperson have had the experience of what he/she is capable of, how much they charge for certain works, how reliable they are and most importantly how good their work is.
Failing this, there are schemes where tradespeople register with known as competent person schemes. Any tradesperson who has joined such a scheme is prepared to have his work regularly checked by such people as Building Control officers from the local council, water authorities and competent person scheme inspectors. These control the quality of the tradesperson's work, and can be trusted.
Unfortunately there is nothing to stop cowboy tradespeople setting up and trading. Only when they have ripped off a number of people who have subsequently complained to Trading Standards will there be an investigation into the quality of work and the prices they charge.
But if you have employed such a tradesperson who has not done an acceptable level of work to your property, then you have the right to call them back regardless of the price you paid them. The attitude of "you didn't pay a lot so what do you expect" is not an excuse for poor quality of work. As a tradesperson who has been in this industry for over 30 years, the price you pay for a job should not reflect the quality, and any tradesperson with a good work ethic towards their customers will not overcharge and do the job to the standard required. Their customers will feel they have had value for money and won't have to call the tradesperson back for a fault on their work.
- Mark Lewis
Are you looking to change careers and become a professionally qualified plumber yourself? Access Training Wales offer a number of accredited plumbing courses, not just for those looking to start a new career but also for DIY enthusiasts wanting to earn some new skills. For more information on what courses are available to you give us a call on 0800 345 7492.
Now that you've completed your patio course and it's time to lay the slabs, how do you decide which ones to use? Cost will usually have some effect on choosing the materials you use. Bear in mind whether you have a large or small budget, however the difference between a good looking patio and a rather dull looking one may be just a few pounds difference per metre, so is the cost saving any benefit?
Remember, a patio should last you years - to change it later could become costly. If possible the choice of slab should be in-keeping with the surrounding areas. Laying a patio that, when finished, does not look right in its surroundings will only cause disappointment and make you feel like it was a waste of time and money. You need to consider what the patio area will be primarily used for. Some patio slabs become very slippery when wet - riven slabs are less likely to become slippery but are slightly uneven, which may cause a few issues with your table and chairs (they may wobble).
During rainy periods, take into consideration that certain types of slabs require more to lay. Budget slabs are quicker to lay as each slab is the same size and thickness, while high priced slabs of natural sandstone etc. will require a longer time span, due to them being irregular in size and shape. A lot more skill is required when you lay this type of slab, but having said that they look amazing down and you will probably feel the cost was worth it. Remember if you are laying random sized slabs or mixed patio sizes extra time will also be needed. With this type of slab plan the layout (dry) before actually getting to work - if you don't know where the last slab is going don't lay the first one.
Again, this is a very brief explanation and no substitute for one of our dedicated patio-laying courses. If you would like more information on this or any other of our range of construction courses, contact Access Training Wales on 0800 345 7492.
Best of luck and fingers crossed for a good summer this year!
- Richard James
With the weather liking to change for the better over the next few days many of you are probably starting to look forward to what hopefully will be a proper summer this year. If you are in need of patio for your barbeque/sun loungers etc, here is a quick insight from Access Training on how to do it;
Step 1: Decide where you are going to pu the patio. Mark out its postition using pegs and a string line. Be sure to clear the area of any vegetation.
Step 2: Dig out the soil to a depth of about 150mm (6") below your intended finished patio level.
Step 3: You will need to lay a layer of hard-core of at at least 100mm (4") thick. Compact this layer using a place compacter (also known as a wacker plate).
Step 4: Using the line you created earlier start laying your slabs on a mortar bed approximately 50mm (2") thick. Tap each slab down with a rubber mallet and keep checking for level. Make sure there are even gaps between each slab. You can make a wooden spacer of around 10mm (½") to do this.
Step 5: Continue until all your slabs are laid, making sure you follow the fall as you go. If you need to cut any slabs use an angle grinder, making sure that you wear the appropriate personal protective equipment.
Step 6: When the patio is finished wait a few days for the mortar to set and fill the joints with a semi dry sand/cement mix. Wait a few days and then get the barbeque going and sit back and relax.
Obviously this is a very brief explanation and involves a little more knowledge on setting falls and levels. If you would like to learn more, here at Access Training we run dedicated courses on laying patios, which will give you a more in-depth look as well as practical training. For more information, contact us on 0800 345 7492.
In the second part tomorrow we shall look at deciding the best patio slabs to use for the job.
- Richard James
The question most electricians are asking in this day and age is which CPS (Competent Person Scheme) to join - there seems to be quite a choice out there. Does it matter which one we choose? We could go with the well known few or alternatively try one of the other scheme operators. What are we getting for our money?
Well let's be clear about one thing - they are all equal! Each scheme has to be approved by the Department for Communuties and Local Government (DCLG) and all have to meet the same criteria. No scheme can therefore be discriminated against and one scheme should not be a preference over another in any contractual specification. To do so would be against the law.
So in reality it doesn't matter which scheme you choose, it's down to personal choice. Some are better than others if you want to move into the renewables sector. Most are upfront and explain their charges clearly. Some will even give you stickers for your vehicle; others don't - you have to pay for them! Some offer a workmanship guarantee as part of your membership, with others you have to purchase this separately.
So in my humble opinion, shop around and go for the scheme that offers your company the best service for you. Every scheme has to assess you to ensure you are working to a competent level; that is the important factor in all this, not which sticker you put on your van.
- Mark Jenkins & Neil Thomas