Towards the end of August the Electrical Safety Council revealed that DIY errors are the cause of almost half of all serious electrical shocks in UK homes.

Their survey, which took results from both electricians and consumers, found that many DIYers in fact CAN'T do it themselves and are in fact causing themselves extensive and expensive repairs that need to be done by a professional electrician. And that's if they're lucky - they're also risking both their lives and their family's lives.

These over-confident "Dive-in" DIYers are not only attempting simple jobs either, as one in five respondants without any form of electrical training said that they were confident enough to try their hand at installing new lights. One in ten even said they'd even have a go at new wiring!

So where is this added sense of bravado coming from? Well it's partly coming from relying on the advice of friends and family, who usually aren't electrically qualified themselves (over half surveyed admitted to this) but there's also another source - the internet. Two fifths said they happily turn to Google for advice, using "how-to" video guides from YouTube rather than getting proper training or calling in a professional.

But even with this factors considered, it usually comes down to the stereotypical male bravado. two fifths of men say they feel a responsibility to do electrical and DIY jobs, and almost half of all men are likely to try a job themselves or ask a mate, before seeking help from a professional.

In addition to these facts 2,000 electricians from across the country were asked about their experiences and the results were equally as alarming. 82% said repairing failed DIY efforts costs the homeowner more overall in the long run. Even worse, one third said they had seen or been involved with fixing DIY which had resulted in fires, serious electric shock or serious financial cost to repair.

Phil Buckle, Director General of the Electrical Safety Council, said: “As budgets continue to be stretched, many people will look for the easy solution but we have found this can often be more costly in the long term and can also pose severe risks. There is a lot of good advice out there on how to go about tasks safely but you must make sure the advice you take is reputable. For the small tasks that you are not sure of and for all the major jobs, my message is DDIY – Don’t Do It Yourself – get a professional in. You can find a registered electrician in your area by searching the Electrical Safety Register.”

DDIY even has some minor celebrity backing in the form of former Changing Rooms DIY expert Andy Kane (aka "Handy Andy"). He said: He said: “I’m well known for my DIY skills and love getting stuck into a good project. But when it comes to electrical DIY I always get professional advice and help. I don’t think it’s unmanly to want peace of mind for yourself and your family. Even when you are carrying out simple DIY jobs like putting up pictures, it’s important to be aware of the potential danger electricity presents in the home.”

So next time you're thinking of installing some new kitchen lights or doing a bit of rewiring, stop and think whether it's really in your ability to do that. Either swallow your pride and get a professional electrician to do the job properly, or consider getting real electrician training so you can do it yourself with REAL confidence. As well as offering training courses to those looking to become a professional electrician, Access Training can also give DIY enthusiasts the knowledge, skills and qualifications they need to do extensive home rennovating. To find out more visit our courses page or call us on 0800 345 7492.

Following our plumbing glossary yesterday, Access Training have also put together a brief post covering common electrical terms that will be handy for all the aspiring electricians out there - whether they're DIY enthusiasts or aiming for a professional career.

Bonding: The process by which all metal parts in a circuit are electrically connected together and then linked to a real earth. This is done to prevent any metal component within a building becoming dangerous should it become live due to an electrical fault or damage. Any fault should cause the circuit protection device to operate and isolate the incoming mains.

BS 7671: Currently in its 17th Edition, this is the UK national safety standard for electrical installation work.

Consumer Unit: These are used to control and distribute electricity around the home. They usually contain a mains switch, fuses/circuit breakers and one or more residual current devices.

Earthing: In the event that there is a fault in the circuit, this will minimise the risk of an electric shock. It provides a path for the faulty current to flow safely to earth, causing the protective device (such as a fuse) to disconnect the circuit and stop the danger. An electrician should check that the earthing and bonding is satisfactory before starting any work.

Electrical Installation Condition Report (EICR): A report on the condition of your electrical wiring, containing an overall assessment of the safety of the wiring, observations on its condition, and a number of recommendations (in order of priority) for action (if any is required) to restore the wiring to a satisfactory condition for continued safe use. These were formerly known as Periodic Inspection Reports (PIRs).

Flush-fitted: These are electrical switched or sockets that have been installed so that their back boxes are contained within the wall or ceiling, making only the front plates visible. This often looks nicer than surface mounted connections but usually requires chasing to complete.

Miniature Circuit Breaker (MCB): These are automatic protective devices fitted into fuse boxes. They will disconnect a circuit should there be a fault or overload.

Part P: The specific section of the Building Regulations for England and Wales, which relates to electrical installations in domestic properties.

Surface-mounted: This is when switches and sockets are installed on top of a surface rather than behind it. While it is less seamless than flush-fitted installations, it causes less disruption to any decoration that surface may have.

Two Way Switch:  Switches which can be used in pairs so that either can turn a light on or off. Each switch has terminals allowing them to be linked using Three Core and Earth cable.

Of course once again this is only a very brief look at some of the things electricians come across on a daily basis, and is no substitute for proper comprehensive electrical training. If you would like to find out more about what it takes to become an electrician, earn valuable skills and the qualifications to go professional - Access Training have exactly what you need. With courses suitable for both trainees and homeowners looking to do a spot of DIY on their property, now has never been a better time to gain a better understanding of the electrical trade. Please visit the courses section of our website or alternatively get in touch with our team on 0800 345 7492.

From: Professional Electrician & Installer

Findings from a recent survey into consumer attitudes to payments reveal that many self-employed tradespeople may be losing potential income by not being able to accept card payments.

However, there is competitive advantage to be gained as the survey shows that businesses adopting new card payment technology often attract more customers than those only accepting cash. In the last year, one-in-five UK consumers has abandoned a purchase due to the trades person not accepting card payments or because they did not have enough cash, over half of consumers (54%) finding this lack of flexibility inconvenient.

The implications are far reaching:

• 72% of consumers are left with a negative impression of a business that fails to accept cards
• 28% of customers may also see this lack of service as poor customer service
• 19% see lack of card payment options as being unprofessional
• 18% even perceiving the business as unsuccessful or struggling
• 87% state that they spend more money when paying by card as they purchase additional services or products, demonstrating the potential benefits on offer for those mobile workers that adopt the new service

Tradespeople have the potential to gain new customers by accepting card payments on the move. 38% of people saying that would prefer a tradesman (38%, an electrician 35% and a plumber 33%) if they accept card payments over one that doesn’t, even if the job quote, materials and service quality are the same.

The survey of 5176 people was conducted via online interviews with UK consumers (18+ year olds) during April 2013 for WorldPay.

As a consequence WorldPay has launched ‘WorldPay Zinc’ which allows tradesmen to use a mobile chip & pin keypad, costing £59.99, to take card payments on-site. Offering quick transfer of funds (usually 4 working days), this service offers a pay-as-you-go system of 2.75% per transaction.

This amounts to the tradesman having to pay £2.75 on every £100 pounds that is put through the card reader, this may seem to be a lot, but bear in mind some retail outlets pay 5% or more.

- Mark Jenkins

Mark Jenkins is the Electrical Course Development Manager at Access Training. If you would like to learn more about electrical work and maintenance, you might want to consider one of the many electrical training courses we offer. These are available for both DIY enthusiasts AND people looking to gain the vital qualifications needed to make the career change to become an electrician. To find out more give us a call on 0800 345 7492.

Original article: British Gas plans to offer free power on Saturdays

So British Gas is offering some of its customer’s free electricity – on Saturdays! Sounds like a good offer, but if something seems too good to be true – it usually is.

Is this just a PR plot too increase profits? Or a way of pushing consumers into requesting the so called ‘Smartmeters’ so British gas can exceed their installation targets? Is it designed to tempt more people to by their electricity from British Gas?

What benefit will those of us that don’t have Smartmeters get? Free on Saturday – sorry I have better things to on a Saturday than spend time at home using free electric. Vacuuming the house, the car, doing multiple loads of washing, tumble drying the clothes so I can do the ironing with free electric, allowing the kids to use the games consoles all day!!

Sounds like a con to me, everyone has better things to do on a Saturday, it will amount to British Gas giving away nothing.

- Mark Jenkins

Mark Jenkins is the Electrical Course Development Manager at Access Training. If you would like to learn more about electrical work and maintenance, you might want to consider one of the many electrical training courses we offer. These are available for both DIY enthusiasts AND people looking to gain the vital qualifications needed to make the career change to become an electrician. To find out more give us a call on 0800 345 7492.

In response to a survey conducted by the IET, (Institute of Electrical Technicians) formally the IEE, in which 87.3% of respondents said they would like to be able to access IET publications via electronic media such as PC’s, tablets, Smartphones etc.; the IET has launched Wiring Regulations Digital: Online – a suite of browser-based versions of its publications in e-book format. Users can also request a free trial before committing to buy the books.

The e-books currently included in the subscription are:

• BS 7671, The IET Wiring Regulations
• The On-site Guide
• Guidance Note 1: Selection and Erection of Equipment
• Guidance Note 2: Isolation and Switching
• Guidance Note 3: Inspection and Testing
• Guidance Note 4: Protection Against Fire
• Guidance Note 5: Protection Against Electric Shock
• Guidance Note 6: Protection Against Overcurrent
• Guidance Note 7: Special Locations
• Guidance Note 8: Earthing and Bonding
• The Electrician’s Guide to the Building Regulations
• The Electrical Installation Design Guide: Calculations for Electricians and Designers
• Code of Practice for In-service Inspection and Testing of Electrical Equipment
• Electrical Maintenance
• and also new titles will be added as they published

The suite of publications has a number of features which can help support electrical engineers and FE college lecturers in accessing and sharing information more easily. All of the publications contained in the platform are automatically updated to the latest edition.

Geoff Cronshaw, the IET’s chief electrical engineer, said, “Wiring Regulations Digital: Online is very much the IET’s response to the changing needs of electrical engineers and those teaching electrical standards in the UK.

“From our research, it is clear that a large majority of electrical contractors use online sources to gain technical information on wiring regulations and guidance. With this in mind, we’ve developed the online function to house a large number of our regulation and guidance publications.

“The software is available through an annual subscription which gives access to all of the latest regulations and guidance that every electrical engineer needs. Not only that, the platform also ensures that everyone has the most up-to-date standards and reference points to work from – helping to ensure that the correct standards and procedures for electrical wiring are practiced.”

- Mark Jenkins

Mark Jenkins is the Electrical Course Development Manager at Access Training. If you would like to learn more about electrical work and maintenance, you might want to consider one of the many electrical training courses we offer. These are available for both DIY enthusiasts AND people looking to gain the vital qualifications needed to make the career change to become an electrician. To find out more give us a call on 0800 345 7492.

Temperatures could soar to dangerously high levels in some homes insulated under the government's flagship Green Deal scheme, experts have warned. Energy-saving measures designed to save on winter fuel bills and protect the environment could pose a risk to health during summer heatwaves, they add. Homes in densely populated urban areas such as London are most at risk. The government says it is aware of the problem and is taking steps to prevent overheating in Green Deal properties.

Heat can build up during the day and has nowhere to escape at night leading to poor air quality and a greater risk of heat stress for the occupants which, in extreme cases, can kill. It is vital that homes in the UK are better insulated to help meet carbon emission targets and save on winter fuel bills. But the risk of overheating had been overlooked in the "big rush to insulate and make homes airtight", particularly as more extreme weather events, including heatwaves, are being predicted for the UK by meteorologists.

"Overheating is like the little boy at the back of the class waving his hand. It is forgotten about because the other challenges are so big," he told the BBC News website. Very effective measures are being taken to protect against winter temperatures but by doing that they increase the risk of overheating during summer.

Research by Leicester De Montfort University, suggests top floor flats in 1960s tower blocks, and modern detached houses were most at risk, particularly if they were south facing. Heat was likely to have the biggest impact on elderly or infirm people who remained at home all day, the research suggests. The elderly are going to suffer. Suffering means they are going to die from overheating.

Under the Green Deal, householders take out loans to finance improvements such as double-glazing, loft insulation or more efficient boilers. The idea is that the energy savings they make should more than compensate for the repayments. In total it said there had been 38,259 Green Deal assessments, where customers are given initial advice about what energy improvements they might be eligible for. Of those, 241 households have confirmed they would like to proceed with work.

According to research by a group of leading engineering and climate change experts, published last year, "Green Deal measures could create new problems in the future, with inappropriately insulated properties experiencing poor indoor air quality and significant summer overheating. It said the increased likelihood of summer heatwaves could lead to rise in heat-related deaths from 2,000 to 5,000 per year by 2080 "if action was not taken".

The Department for Energy and Climate Change says it has now issued fresh guidance to Green Deal suppliers to help reduce potential risk from installing energy efficiency measures.

He said there were simple measures anyone could take - whether living in a well-insulated home or not - to keep heat levels down, such as keeping windows closed during the day to trap cool air and opening them at night. Fitting shutters to windows and painting exterior walls white - both common sights in Mediterranean countries - would also help, but were unlikely to be widely adopted in the UK due to the relative rarity of heatwaves.

Here is the link to the full BBC report.

10 ways the UK is ill-prepared for a heatwave

- Mark Jenkins

Mark Jenkins is the Electrical Course Development Manager at Access Training. If you would like to learn more about electrical work and maintenance, you might want to consider one of the many electrical training courses we offer. These are available for both DIY enthusiasts AND people looking to gain the vital qualifications needed to make the career change to become an electrician. To find out more give us a call on 0800 345 7492.

It’s happened to us all at some time or other, the job we have been putting off because it’s a little bit too big or we’re not sure how to do it. We bite the bullet and decide to get a tradesman in to do the work for us. Which tradesman? Where do we go to find out if the voice at the end of the phone is in fact a ‘quality’ tradesman and not John Wayne with a screwdriver?

You could go to www.trustmark.org.uk

TrustMark is a government endorsed scheme that regularly checks that the registered tradesmen are providing their customers with the quality service and workmanship members of the public expect and deserve (quite rightly). Trustmark registered firms have to;

1. A firm's technical skills have been independently checked through regular on-site inspections, as well as checks on their trading record and financial status;
2. Firms have signed up to a code of practice that includes insurance, good health and safety practices and customer care;
3. The approved scheme operator has checked and will continue to monitor the firm's quality of work, trading practices and customer satisfaction;
4. Firms are able to offer an Insurance Backed Warranty;
5. Deposit Protection Insurance is available for consumers in the event a firm should cease trading;
6. Firms will be able to tell you about any building regulations you must comply with and may also be able to provide appropriate certificates;
7. If you have a problem or disagreement with the firm, there will be a clear and user-friendly complaints procedure to help resolve the issue;
8. The scheme is fully supported by Government, the building industry and consumer protection groups.
9. All of these checks will give you - Peace of Mind.

When employing a tradesman TrustMark recommends you take the following advice;

• Be specific and set out a detailed, clear brief when requesting at least three quotes.
• Ask friends and family for a recommendation and check the TrustMark website to ensure that the tradesman is registered for the particular trades you require
• Use a firm that advertises using a landline phone number and be very wary of those only willing to give you a mobile number
• Seek references, speak to previous customers and if a reasonable sized job, visit previous jobs
• Don't just go with the cheapest, consider your ability to communicate with the firm and the quality of their work
• Only pay for work that has been done and not by advance payments
• If materials need to be bought in advance by the tradesman, it is reasonable that the customer is asked to pay a fair percentage of these costs as the job progresses
• Always use a written contract as it offers you protection if anything does go wrong
• Agree in writing any changes to the agreed contract value and ensure these are agreed in writing before the work is done.

If you use a TrustMark tradesman your work should be carried out to a high quality and if things go wrong (God forbid) you, through the scheme, have a means of recourse. That has to give you Peace of mind.

- Mark Jenkins

Mark Jenkins is the Electrical Course Development Manager at Access Training. If you would like to learn more about electrical work and maintenance, you might want to consider one of the many electrical training courses we offer. These are available for both DIY enthusiasts AND people looking to gain the vital qualifications needed to make the career change to become an electrician. To find out more give us a call on 0800 345 7492.

Summer holidays on the Costas are with us once again. Lots of families are jetting off to spend a week or two in the sunshine. All looking to have fun and this will probably mean consuming large quantities of alcohol.

But we have become so reliant on our electrical and electronic gizmos; we all need an adapter to charge them up whilst we are in foreign lands. Our UK standard plugs will not fit into the sockets that we find in our ‘little paradise’.

Off we go to the local supermarket to purchase an adapter – but they are not cheap, so plan B comes into action. Off we go to the ‘cheap’ shop (you know the ones – everything’s a pound!). But is that cheap product safe? Probably not!

The above item is the subject of a “Product Recall” as it has been identified as being UNSAFE.

“The product poses a risk of electric shock because the user comes into contact with live parts when inserting the plug into the socket. The product does not comply with the relevant national standard BS1363.”

What a wonderful holiday – a couple of days in the sun followed by a couple of days in hospital receiving treatment for electric shock and/or electric burns; if you lucky. If you’re not you might be flying home baggage class in a wooden box!

You can’t put a price on safety; remember it might by your child that gets the shock of their lives!

For more information on this and other recalled products visit the Electrical Safety Council website at:

http://www.esc.org.uk/public/guides-and-advice/product-recalls/

- Mark Jenkins

Mark Jenkins is the Electrical Course Development Manager at Access Training. If you would like to learn more about electrical work and maintenance, you might want to consider one of the many electrical training courses we offer. These are available for both DIY enthusiasts AND people looking to gain the vital qualifications needed to make the career change to become an electrician. To find out more give us a call on 0800 345 7492. 

Research by the Electrician Technician Registration has found that "a lack of recognised standards for industry competence" is restricting both electricians' ability and their eventual career progression.

The study looked at how electricians' perceived their professional and discovered many were confused about what constitutes "competence" and which industry bodies could be called upon for careers guidance. Participants in the research also claimed that the vast amount of electrical qualifications available to them made it difficult to decide which routes of study to take in order to gain professional recognition. They also agreed that without a visible benefit of pursuing such qualifications, they feel no reason to aspire toward them.

In an attempt to address these concerns, the Technical Advisory Panel and Steering group (TAPS) - a collaboration of bodies including the IET, the Engineering Council, Electrical Contractors' Association and the Joint Industry Board, will now act on these key issues highlighted in the research;

• Developing careers pathways to enable professional recognition for electricians to progress to engineering technician.
• Adopting a 'one body' consistent approach to providing advice on a national scale with an electrician technician membership package.
• Mapping the engineering technician professional standards to the established industry competence card schemes, NVQs and apprenticeship frameworks.
• Promoting the benefits of gaining engineering technician recognition to support career progression.