With Gas Safety week coming up soon Access Training will be highlighting the importance of gas safety in our blog in the lead up to 16-22 September. However this isn't always going to be in a fun and educational way - yesterday the Heating, Ventilating & Plumbing magazine reported two separate instances of dishonest traders either fined or leaving people at risk because the tradesmen were not Gas Safe Registered.

The first article reports that a self-employed heating installer from King's Lynn was fined for illegally carrying out sub-standard gas work at two homes in Norfolk. Ryan Neale, trading as R. Neale Plumbing and Heating, installed gas appliances and pipework despite not being Gas Safe registered. He was fined a total of £2,000 and ordered to pay a further £1,000 in costs after pleading guilty to two separate breaches of the Gas Safety (Installation and Use) Regulations 1998 for his work at each property – four charges in total.

Secondly, a London heating installer was also fined for illegal and unsafe gas work. Abhishev Yadav, 28, of Greenwich, installed a boiler at a property on Penywern Road, Earls Court, that was later classed as ‘at risk’ because the flue was not properly sealed or secured. He carried out the work in March 2011 on behalf of his firm Ability Heating, while falsely claiming to be Gas Safe registered. He was was fined a total of £7,500, and ordered to pay £2,500 in costs plus a £120 victim surcharge for breaching the same regulations.

In response to these stories,  Gas Safe Register chief executive Russell Kramer has issued this statement: "Every Gas Safe registered engineer has an ID card which shows who they are and the type of work they are qualified to carry out. Customers should ask to see this and check the engineer is qualified to do the job in hand. You can also check your engineer by calling us on 0800 408 5500 or by visiting www.gassaferegister.co.uk.

Joining the Gas Safe Register is a legal requirement of any tradesman installing, maintaining and decommissioning gas appliances and can only be achieved when they have been awarded all of the relevant gas qualifications. The register can also be used by homeowners to search for a suitable tradesman in their area, or to ensure that the one they've hired is a legitimate gas engineer. 

If you're interested in earning the qualifications to become a qualified gas engineer, Access Training offer comprehensive gas courses that will have you well on your way to success. Completing our courses successfully will give you the skills and knowledge to join the Gas Safe Register and start a new and rewarding career. To find out more give us a call on 0800 345 7492.

Gas Safe has proved time and time again to be an effective method in separating genuine gas engineers from cowboy traders, so that the general public know that when they hire a tradesman he or she is legitimate. But despite this, this sort of system is currently only available for gas engineers - so Joe Bloggs may not have the same level of certainty when hiring a plumber for wet work.

Until now that is. Or more precisely, October 8th 2013.

WaterSafe has been put together to provide a search facility of all Approved plimbers working in the UK, thanks to a partnership between UK water suppliers and the seven Approved Contractors' Schemes working across the UK. It will promote compliance with the Water Supply Regulations 1999 and Scottish Water Byelaws in order to protect the public and make it even more difficult for unqualified dishonest plumbers to get work. Unlike the Gas Safe register this isn't a legal requirement, but will publically show plumbers are both fully qualified and competent in their trade. So arguably its something that's probably in your best interest to do.

WaterSafe's website isn't open just yet, however it can be found at www.watersafe.org.uk where you can find all the relevant contact details to find out more about the scheme. Keep checking back to this blog, as we're sure to be covering more of this brilliant new scheme closer to its official launch.

In the meantime - if you have any outstanding plumbing qualifications or are looking to become a professional plumber yourself, have you considered a comprehensive plumbing course from Access Training? Our courses are suitable for both newcomers and experienced plumbers alike, so give us a call on 0800 345 7492 or check out the courses section of the site to find out more.

Flush only once. If it's not flushing the first time, don't flush again. This will cause more water to be pumped into the toilet bowl. If the toilet becomes clogged the first flush will not cause the bowl to overflow, but the second flush might!

Put on a pair of rubber gloves. Toilets are inherently unsanitary places to work, but a good pair of rubber cleaning gloves will protect you from any germs within. If you can see the cause of the clog, remove it from the toilet if possible.

Protect the floor. What's worse than a clogged toilet? An overflowing toilet. Minimize the potential damage by placing newspapers or paper towels on the floor to soak up liquid. Besides, minor splashes and spills are bound to occur when you're unclogging the toilet. The paper will make for easier clean-up later.

Make sure the water supply to the toilet is off. It should be located right behind the toilet, and looks like a regular faucet knob. Do not shut off the supply for the house, since this will prevent others from using water. If the water is off to at least the toilet, this will prevent the bathroom from flooding.

Ensure that the bathroom has good air circulation. Turn on the ventilation or open a window to minimize foul odours, and to protect against potentially toxic fumes from any chemical products you may need to use.

Plunger Method

If you know there's an object (such as a child's toy) causing the clog, skip the plunging and go straight to another method.

Be sure to use the right plunger. It is important to use a large heavy-duty rubber plunger, either the ball-shaped type or one with a fold-out rubber flange on the bottom which forms a seal. Do not use the small cheap suction-cup type of plunger––these will often not work. Remember, the larger the plunger, the more force you can apply down into the clogged drain. The plunger should have a shape which ensures that the water you force out of it when you push down does not shoot back up into the toilet bowl instead of pushing into the drain.

If your plunger is not making a tight seal, try wrapping an old rag around the end of the plunger and press down on any leaks. Run the plunger under hot water before using it. This will soften it up, which will help with creating a seal.

Insert the plunger into the bowl and press down firmly but slowly. Make sure you're covering the hole completely. The plunger should be submerged in water to be effective. It is important to be pushing and pulling with water, not air.

Add water to the bowl if necessary. Sharply pull up on the plunger to create suction in the drain, then push in to create pressure. Remember, the clog got jammed going in, so don't be too aggressive with your pushing because you might just jam it further. It is more the suction than the pressure, constantly disturbing the clog in both directions that will gradually cause it to be loosened.

If the plunging eventually drains the bowl but the clog is still blocking a free flow down the drain, leave the plunger in the bowl and fill the bowl with water again. Fill it to the point it is normally after a regular flush. Then plunge again. Stubborn clogs might require you to do this a number of times.

Should plunging fail to unclog the drain, a wire coat hanger may clear the obstruction. This will generally work if there is an obstruction in the first few inches of the drain.

Unravel the hanger, twisting the top ends apart until they are no longer connected. (To avoid damaging the porcelain tightly wrap one end with a rag). Stick the wrapped end of the wire into the drain. Once the wire is in the drain, twist it, push it, and manoeuvre it in a circular motion to clear the drain

Plumbing Snake Method

Purchase or borrow a plumbing snake. A plumbing snake (also sometimes called a "flexible cleaning tool" or "auger") is a flexible coil of wire that can "snake" through the curves of a drain and get deeper than a wire can. The best snake is a "closet auger" which is designed specifically to clear toilet clogs without damaging or staining the bowl. A plumber would likely use a closet auger.

Insert one end of the snake into the drain. Push down, feeding the snake further into the drain until you feel an obstruction. Twist and push the snake through the obstruction until the water begins to drain

Snake in reverse, as it may become necessary to remove the toilet and run the snake through in the opposite direction. This is especially true with hard obstructions that may have been flushed by a curious child. If a hard obstruction is known, and you are not comfortable removing and replacing the toilet, contact a plumber.

- Mark Lewis

Mark Lewis is the Plumbing Course Development manager at Access Training. If this blog has interested you and you would now like to learn more about the plumbing trade, you might want to consider one of our extensive plumbing training courses. These range from DIY courses for enthusiasts to professional courses that will give you the qualifications you need to become a plumber. If you would like to find out more give Access Training a call on 0800 345 7492 and we'd be happy to explain in greater detail.

Full story: HVP Magazine - Plumbers feeling positive for 2013

Plumbers across the UK are expecting to see an improvement in business throughout this year, as discovered by a recent event organised by software/service provider Sage. An overwhelming 90% of attendees are expecting their business to grow by up to 15% by the end of 2013, with many revealing that in the past managing their finances and administration tasks have been their biggest difficulty.

The main focus of the event, which was held in Croydon, was to determine whether local businesses understood the recent changes to PAYE (Pay-As-You-Earn tax) reporting with the introduction of RTI (Real Time Information) reporting requirements. Overall knowledge of these changes seemed divided, with only about half being aware of the changes and what they meant. However a third of respondents planned to increase their staffing in the near future with an apprentice or full-time employee. Those intending to expand were uncertain about what the changes mean for them, whilst those that don’t cited extra red tape as the main reason for remaining a sole operator.

Neilson Watts from Sage UK said: "I’m not surprised that the research highlighted so many people struggle with their finances. No one starts a business or becomes a plumber because they love the admin side of things – it’s because they have a skill and a genuine passion for their trade, but if you don’t get it right it can come back to bite you."

So will 2013 be the year you strike it big as a plumber? If you're looking to change careers and move into the world of plumbing, it's important to be fully prepared. Access Training offer a fully comprehensive plumbing course, giving you all the industry standard qualifications employers look for. But as well as improving your prospects for employed work it'll also give you good grounding to set up your own self-employed plumbing business. Even when you've completed the course, Access Training will be on hand to help you as you set up the business and our tutors available to give advice whenever you may need it.

Make 2013 your year. Call 0800 345 7492 today.

When wanting to completely refurbish a bathroom, it can take a number of skills or tradespeople to complete the work. Firstly safely the water supply and any electrics need to be isolated, so that the de-commissioning of the bathroom suite can begin. Then the walls and ceiling can be torn down if required, with the rubble and old suite also having to be disposed of in a responsible way.

Following that any required alterations to the water supply pipes can be performed, as well as sorting out electrical wires, flooring and tacking new plasterboard walls and ceiling.

Once the finish plaster coat has been applied and dried, the bath can be made up and fixed in place. Once carpentry bits such as architrave and skirting boards can be fixed, then the tilling can take place. After this the rest of the plumbing can be completed and the electrics finalised, woodwork painted then if floor covering is going to be used it can go down (however if the floor is to be tiled this should be done before the woodwork).

So if you can organise the different trades or do all of this work yourself if you have the relative qualifications or the relative expertise of experience then managing the project yourself can save you a considerable sum of money , but it can take a considerable amount of time to organise and manage the project .

With a bathroom fitting company that can cover all trades and manage the project it might seem quite costly to begin with, but in the long run if you personally have not managed such a project then it might be advisable to employ such a company. But only after researching them through areas as “county court judgements”, “trading standards” and previous clients that have had similar work done. 

- Mark Lewis 

If you would like to learn more about bathroom fitting yourself, we offer a specially designed DIY Bathroom Fitting course here at Access Training. You'll learn everything you need to know including bathroom design, the fitting of covers, tap connectors, wastes, ball valves, siphons, WC seats and more. For more information about this or any of our other professional trade courses, contact us at 0800 345 7492.

Following on from part 1 we will now look at what training courses are available to you, as well as factors such as their cost and duration.

At Access Training we deliver many construction courses, including;

• Brickwork
• Plastering
• Tiling
• Carpentry
• Painting & Decorating
• Plumbing
• Electrical
• and Gas Courses

When hiring a plumber or any other tradesperson, there are a number of things you should find out beforehand. Questions such as what kind of plumbing training they've had, their qualifications and previous experience are crucial when it comes to getting the best value for money.

The first and foremost way to find a reputable tradesman is to ask friends, family or other tradespeople for a recommendation. Others who can recommend a tradesperson have had the experience of what he/she is capable of, how much they charge for certain works, how reliable they are and most importantly how good their work is.

Failing this, there are schemes where tradespeople register with known as competent person schemes. Any tradesperson who has joined such a scheme is prepared to have his work regularly checked by such people as Building Control officers from the local council, water authorities and competent person scheme inspectors. These control the quality of the tradesperson's work, and can be trusted.

Unfortunately there is nothing to stop cowboy tradespeople setting up and trading. Only when they have ripped off a number of people who have subsequently complained to Trading Standards will there be an investigation into the quality of work and the prices they charge.

But if you have employed such a tradesperson who has not done an acceptable level of work to your property, then you have the right to call them back regardless of the price you paid them. The attitude of "you didn't pay a lot so what do you expect" is not an excuse for poor quality of work. As a tradesperson who has been in this industry for over 30 years, the price you pay for a job should not reflect the quality, and any tradesperson with a good work ethic towards their customers will not overcharge and do the job to the standard required. Their customers will feel they have had value for money and won't have to call the tradesperson back for a fault on their work.

- Mark Lewis

Are you looking to change careers and become a professionally qualified plumber yourself? Access Training Wales offer a number of accredited plumbing courses, not just for those looking to start a new career but also for DIY enthusiasts wanting to earn some new skills. For more information on what courses are available to you give us a call on 0800 345 7492.

Combining trades, such as taking both a plumbing and gas engineering course, has always been an ideal way of making sure you are never short work as a qualified professional. It's something we've always encouraged at Access Training, but it's also something that seems to be becoming more and more essential in today's working environment.

The AA training their patrol officers in plumbing emergencies, for example, is a sign of the recession and the need for employers to diversify their workers. With British Gas also now venturing into other areas such as blocked drains, electrics and white goods repairs, it is obvious that in today's climate you cannot rely on a single trade only for a living. I feel grateful that the time I had spent on the tools, only doing plumbing and heating installations for 25 years (single trade only) is now a thing of the past.

It is said there is a major shortage of qualified tradespeople to cover the demand of work that is out there. I suppose I was one of the few tradesman that was never out of work, mainly doing new build but also refurbishments, commercial and industrial installations. I thought I was diversifying at the time, but it would seem even that wouldn't be enough these days. In doing these lines of work I had gained the required qualifications and felt I had gained a vast knowledge of these areas. But I admit that I feel I could not know all there is to known in these fields, with products and techniques regularly changing along with different regulations you need to comply with.

So to think of these mechanics who have to do plumbing course, I don't think it's detrimental to those qualified tradespersons who are of high quality, conscientious and only charge a fair fee for their work. They should not be worried about losing work to companies like British Gas and the AA, but what would be a point of concern is to what level they will be taught to.

Are you a plumber or gas engineer looking to expand your resume in order to take on more work? At Access Training we train both people with no prior experience to become fully qualified in their chosen field and experienced tradesmen looking to train in a new area of work. Each course will give you a professionally recognised qualification, providing you with the skills and knowledge you'll need for any task. For more information, contact us at 0800 345 7492.

- Mark Lewis