With the recession only just behind us and various other money troubles coming into play, it isn't surprising that the country as a whole has adopted some sort of "DIY Nation" mentality of late. And while its encouraging that more and more people are picking up tools and having a go at something they could perhaps do without the aid of a trained professional, this is something that could potentially affect the amount of work of those with the qualifications. However, a recent study has revealed that this might actually not be the case.

The study, commissioned by business insurance broker Swinton Commercial, took a sample of 100 tradesmen and women across the UK and found that in fact business is booming due to the number of botched jobs performed by budding DIYers. 20% of the plumbers who took part said that it often accounted for up to 84% of their workload! A further 25% said that they were regularly called out to fix DIY mishaps at business, while 100% of them were in agreement that over-ambitious DIYers are putting themselves and others at risk.

Some of the jobs reported included:

 

  • A waitress in a cafe attempting to repair a commercial boiler using a bread knife and scissors while the unit was still live.
  • An unsecured bath where overflows were running into the ceiling void. Lead pipes had been left and fudged into the copper pipes, with boxing made from MDF absorbing water.
  • A basin tap fitted without a sealing washer, causing a large water leak, which ran through the ceiling in the hallway.

 

So how does this affect you? If you consider yourself a DIY enthusiast and often do this sort of work, it's vital that you know what you're doing before you start. Access Training offer a number of DIY training courses in plumbing, electric and various construction trades. These courses outline what you're capable of doing around the house on your own not just safely, but legally as well. Knowing when a job is too difficult for you is extremely important, and there's no substitute for the work of a professional tradesman when it is needed. 

Full story: http://www.hpmmag.com/newsitem.asp?newsID=2089

The Chartered Institution of Building Services Engineers (CIBSE) have recently released their first alterations to the 'TM13: Minimising the risk of Legionnaires' disease' guide in ten years. This comes following Britain experiencing its worst outbreaks of the disease to date, as well as in reaction to the advances in technology and environmental concern there are in managing water systems.

Legionella bacteria are commonly found in large sources of water such as rivers and lakes, but can very easily contaminate drinking water systems should it not be treated properly. If the bacteria are allowed to multiply and then become released into the air in water droplets, they become a serious health risk. Large buildings suchs as hotels, hospitals and office blocks, are particularly susceptible to contamination due to their more complex water supply systems.

It is aimed at primarily facility/premises managers, engineers, consultants or any other person involved in the design, installation or maintenance of building water systems. It sets to give out guidance on the appropriate design, installation, commissioning, operation and maintenance procedures necessary to minimise the risk of infection by Legionella from water systems within a building. Principles are highlighted, and practitioners in these fields are encouraged to apply them to their own particular building services applications.

This new guide also makes reference to health concerns on an international level, providing guidance on non-UK based requirements in the hope it will be a "valuable tool" in supporting compliance outside of the UK.

Speaking to HVP magazine, chairman for the new guide Greg Davies said: "The guidance has been revised and updated to reflect the legal, environmental and technological advancements we have seen over the last decade. The significant advantage of this document is it contains the level of advice needed to support those responsible for managing and maintaining water systems and services, for minimising the risks with legionella as well as how to demonstrate proactive control."

To purchase a copy of TM13, visit the CIBSE Knowledge Portal

Full story: Daily Mail - 'Incompetent' plumber causes gas explosion

A 32-year old plumber is currently in course after he caused a gas explosion which resulted in a home being 'blown from its foundations' and leaving the couple inside with serious burns.

While converting the former kitchen of Martyn Moody and his wife Theresa's luxury home in the Lincolnshire Wolds into a dining room, plumber Daniel Hickling cut off and capped the protruding gas pipe, burying it under the floorboards. However during the work he punctured the pipe and failed to carry out a straightforward check to ensure there had been no damage to it.

Later the couple smelt gas and began searching their home. During this time Mr Moody flicked on a cigarette lighter and the flame ignited, causing a massive explosion with such force that the entire building moved an inch. Mr Moody, a retired construction and electrical tradesman spent two weeks in hospital undergoing skin grafts after suffering serious burns to his hands, arms and scalp. His wife suffered burns to her legs and feet nut was released from hospital after two days.

The home, which the couple had built for themselves in 1993, sustained so much damaged that it had to be almost completely rebuilt. It was a year before the couple were able to move back in. They were also left £100,000 out of pocket after being found to be underinsured on their contents insurance and thus had to cover some of the loss themselves.

Lincoln Crown Court were told by prosecutor James Puzey that Hickley was "incompetent to carry out this work and it was carried out incompetently. That led directly to an explosion which almost destroyed the property and caused serious injury to the householders." It was also revealed that he was not a registered Gas Safe engineer and failed to tell the couple this when he agreed to do the work. However he claims that he did not know he would be working on a gas pipe and as such never put himself forward as properly qualified.

Hickley has admitted to breaching the 1998 Gas Safety Regulations and performing work to an inappropriate standard. Recorder Helen Malcolm QC has adjourned the case to a future date when she will give her ruling on the case following these two days of evidence.

-----

Cases like this are a prime example of why having the right qualifications to do the job is vital. Simply having plumbing qualifications is not enough if you are potentially going to work with gas pipes, as not only are you breaking the law and could potentially face prosecution but you are also endangering the lives of your customers. If you train as a gas engineer, becoming Gas Safe Registered isn't just advised, it is essential proof that you are legally competent to work with gas pipes and gas appliances safely. If you are a plumber and would like to learn more about gas engineering, gaining the qualifications required to be eligable for Gas Safe registration, we at Access Training offer comprehensive gas courses to ensure you are fully trained. To find out more click the link or give us a call on 0800 345 7492.

View the amended Part P Document here: planningportal.gov.uk

As of last month the Government has wheeled out its latest changes to Part P of the Building Regulations in an attempt to cut down on the amount of “red tape”. In the eight years since its introduction Part P has been a vital measure in maintaining safety when it comes to electrical installations, making sure that professional electricians have the skill and competency needed to perform these tasks. In order to do certain installations, electricians (and DIYers) are required to gain their Part P certificate and join a Competent Person Scheme such as NICEIC, NAPIT or ELECSA.

The main change to the document is that it is now shorter and has greater clarity, with a notable reduction to the number of works that need to be notified to Local Authority Building Control. The full breakdown of changes is

  • Under the new regulations, any electrical work undertaken in kitchens or outdoors in no longer covered by Part P unless a new circuit is required. 
  • While before installers not registered with a Competent Person Scheme would have to notify their work so that a third-party inspector would need to check it, now these installers can instead use a registered third-party (e.g. another electrician) to sign off their work. This eliminates the cost of producing Building Regulations Compliance Certificates for some minor works, but importantly, the new regulations still retain the need to issue Electrical Installation Certificate Reports (EICRs) for all work carried out within a dwelling.
  • Reference is now made to BS 7671:2008 incorporating Amendment No. 1:2011.

The main positive that has come out of these changes is the potential new areas of work it opens up for Part P qualified electricians who can earn more from inspecting and signing off other people’s work. Organisations have also commended this new streamlined document for not compromising on safety.

However while the ESC (Electrical Safety Council) has praised the fact the Government is amending Part P, they have expressed concern over some of the changes. They believe that the areas that have seen a reduction in notifiable are reasonably high-risk according to data, and so “any electrical work must be of a particularly high standard”.

The third-party certification is also still in question, as the rules for the Approved Inspector Scheme are currently unclear. The document itself is likely to go under review again in 2015.

The Department of Energy and Climate Change (DECC) today released the latest Green Deal statistics, and already there has been warnings coming from various different groups and companies.

Insulation company Knauf has warned that according to the current rate, it will take more than 200 years to reach the Government’s 2020 targets. This comes following the revelation that only 2031 more Green Deal assessments place in April than March, suggesting that interest may already be starting to stagnate.

Northern Europe Knauf Managing Director John Sinfield said: “These figures confirm the industry’s worst fears – that the Green Deal has been strangled at birth by the complete lack of any real incentive to encourage uptake amongst householders. If this rate of activity evens out at 10,000 assessments a month it will take 116 years to reach the original DECC aspiration of tackling 14 million homes – and that assumes an optimistic 100 per cent conversion rate from assessment to Green Deal. At a more realistic rate of 50 per cent it will take 232 years to achieve this goal!

“Therefore, our argument to Government is that a significant ‘demand driver’ is urgently needed in order to create momentum amongst householders. The Government claims that the Green Deal is a market driven mechanism yet as currently designed it will only appeal to a small subset of the population. The Green Deal must be made attractive to ALL householders if it is to stand any chance of success. Cashback should be broadened from just Green Deal to all boiler and insulation retrofits.”

However the slow-down in progress could be due to a “severe shortage” of building companies registered as installers, says The Federation of Master Builders in an unrelated assessment based on the same set of statistics. With only 942 companies approved to carry out the work, the FMB has warned that this is nowhere near enough to deliver targets.

Chief executive Brian Berry said: “There are more than 240,000 companies in the construction industry that employ fewer than 14 people. These companies are often best placed to carry out Green Deal work, but because it is difficult to access the market, they are reluctant to train the number of approved installers needed to retrofit Britain’s building stock.

“The Green Deal has now been open for business for almost four months and demand for work under the initiative appears to be growing, but it still feels like a missed opportunity to the majority of SMEs in the industry who haven’t seen any sign of transformation in the energy-efficiency market.”

In order to combat this, the FMB plan to introduce a “Strategy for the Low Carbon Building and Refurbishment Market”. This will involve giving its members better access to the training and certification required to carry out these areas of work.

Sources: Knaufinsulation.co.uk

theconstructionindex.co.uk

Get in touch to learn more about our training courses!

First Name *
Surname *
Telephone Number *
E-mail address *
Ask A Question *
 
Security Character Security Character Security Character Security Character Security Character Security Character
Enter Letters (No Spaces) *