An important part of Gas Safety Week is making sure people know exactly what to do in the event of a gas leak.

Every year thousands of people across the UK are diagnosed with carbon monoxide poisoning. This highly poisonous gas can't be seen, smelled or tasted, but can kill quickly and without warning. Early symptoms of carbon monoxide poisoning include headaches, dizziness, nausea, breathlessness and then eventually collapsing and even loss of consciousness. As an invisible gas, carbon monoxide can be extremely difficult to detect. However there are ways that you can determine whether an appliance (such as fires, heating boilers, water heaters or cookers) are dangerous. These include:

  • The pilot light continually blowing out
  • An orange or yellow flame rather than a blue one
  • A discoloured scorched area on an appliance
  • A musty smell or signs of soot
  • More condensation than normal on windows

If you see any of these things, whatever you do DO NOT try to attempt any sort of repair work yourself - you could only end up making it worse. Instead what you should do is call the free emergency gas number on 0800 111 999 and follow their instructions. As soon as you suspect a leak, don't start any flames or operate electrical switches. Make sure to put out any fires, open doors and windows to air out the rooms, keep people away from the area and turn the gas off at the control valve. 

Once you've made the call, a trained operator will log a number of details onto a computer. The kind of questions they'll ask you are:

 

  • Your name and phone number
  • The address and postcode of the suspected gas emergency 
  • How many people are at the property 
  • Where the smell is most noticeable 
  • How long the smell has been noticeable
  • Are any neighbours affected 
  • Any special circumstances or access information
Following that you'll be asked a number of questions to determine the severity of the situation. This information will be recorded and sent off to an engineer to take action if its required.

 

 

One of the ways the Gas Safe Register has decided to mark Gas Safety Week by launching the very first nationwide interactive gas map, which can be viewed at www.staygassafe.co.uk.

This map reveals just how many unsafe gas appliances have been found across the UK, how many gas-related accidents or emergencies have occurred and even how many unregistered gas fitters have been caught preying upon the public. It's the first time this level of information has been recorded and compared across postcodes, and the results aren't looking good for the capital of Wales.

Cardiff ranked second only to Birmingham as the area with the highest number of unsafe homes, at a total of 31.1%. The full top 10 (if you can call it "top" that is) of unsafe places in the UK can be viewed below:

1. Birmingham (34.2%)

2. Cardiff (31.1%)

3. Edinburgh (30.9%)

4. Norwich and Ipswich (27.9%)

5. Coventry (27.8%)

6. Manchester (27.5%)

7. Bedford (27.3%)

8. Glasgow (25.2%)

9. Milton Keynes (24.2%)

10. Bradford (23.3%)

While there may not be a whole lot in it between the places, these numbers are still significantly higher than they should be. So where did the research find is the safest places? Brighton took the prize with just 5% (1 in 20) homes found to be dangerous, followed closely by Liverpool (6%), Southampton (6%), Northampton (7%) and Hull (8%). 

The data inspected just under 100,000 homes in Great Britain in the last three years, and found that one in six homes, the equivalent of 4.28 million households, had an unsafe gas appliance. Appliances in one in 25 homes were immediately dangerous and if left unchecked were at risk of causing a gas fire, explosion, leak or carbon monoxide poisoning.

One in three gas customers in Great Britain (around 7.69 million households) also admitted that they’ve never had their gas appliances checked or maintained, despite eight in 10 people (82%) recognising that it needs to be done to protect them from gas dangers. Gas Safe Register’s inspections further found that gas fires are the most dangerous gas appliances in homes. One in three gas fires checked by the Register were unsafe, compared to one in 11 boilers and one in 13 cookers. Just like boilers, gas fires and gas cookers need to be checked and maintained regularly to remain safe.

The public is also being caught out by cowboy unregistered gas fitters, pretending to be legal engineers. One in 10 people admit they took it on trust that their gas engineer is legally registered and never checked if they were. Nearly 3,000 illegal gas jobs have been investigated by Gas Safe Register since 2010, of which nearly two in three (61%) left victims’ homes unsafe and one in five were so dangerous that the Register had to turn off the gas appliance immediately.

Russell Kramer, chief executive for Gas Safe Register, said: "Gas safety is a life or death matter and something that shouldn’t be ignored. People are aware of the potential risks of unsafe gas work and they know what they should be doing to keep themselves safe, but as our research has found, not everyone is acting on that information. This is why we have launched the gas map. It is the first time that data on unsafe gas appliances and illegal gas work has been compared across postcodes in Great Britain. We want people to realise that gas safety is something that they should take seriously and by bringing it to their doorstep it makes it harder to ignore.

"We hope to see millions of people using the gas map during and beyond Gas Safety Week to get a better understanding of how they can protect themselves. Some areas are more at risk, but even in safer areas there is no room for complacency. You only need to enter your postcode to find out localised information about your area. You can also sign up for a free reminder service to get your appliances checked, so that you don’t forget to do this vital and life saving check every year, and search for registered engineers. Our messages this Gas Safety Week are simple – get your appliances checked every year, sign up for our reminder service and only use a Gas Safe registered engineer. It could save yours and your family’s lives."

If you're a Cardiff gas engineer, its up  to you to help lower this figure and get our city off of the table. Meanwhile, if you're a trainee gas engineer or looking to enter the gas trade, it is essential that you not only get the right qualifications, but get Gas Safe registered so that you are legally permitted to work on gas appliances and installations across the UK. An Access Training gas course will provide you with everything you need - expert tutelage, professional qualifications and the best foundation work possible for you to go on and become Gas Safe. To find out more take a look at our courses page or contact one of our team on 0800 345 7492.

 

Gas Safety Week: Keeping our nation safe

Access Training are proud to be supporting Gas Safety Week taking place 16th - 22nd September 2013.

Gas Safety Week is an annual safety week to raise awareness of gas safety and the importance of taking care of your gas appliances. It is co-ordinated by Gas Safe Register, the official list of gas engineers who are legally allowed to work on your gas boiler, gas cooker and gas fire.

Badly fitted and poorly serviced gas appliances can cause gas leaks, fires, explosions and carbon monoxide poisoning. Every year thousands of people across the UK are diagnosed with carbon monoxide poisoning. It is a highly poisonous gas. You can’t see it, taste it or smell it, but it can kill quickly with no warning.

If you’re a Gas Safe registered engineer why not get involved and help remind customers they should:

  • Check their gas appliances every year. Gas appliances should be safety checked once a year and serviced regularly by a Gas Safe registered engineer. Tenants – make sure the landlord arranges this.
  • Check their engineer is Gas Safe registered. They can find and check an engineer at www.GasSafeRegister.co.uk or call 0800 408 5500.
  • Check their engineer’s Gas Safe Register ID card. Make sure they are qualified for the work they need doing. They can find this information on the back of the card.  
  • Check for warning signs their appliances aren’t working correctly e.g. lazy yellow or orange flames instead of crisp blue ones, black marks on or around the appliance and too much condensation in the room.  
  • Check they know the six signs of carbon monoxide poisoning – headaches, dizziness, breathlessness, nausea, collapse and loss of consciousness.  
  • Check they have an audible carbon monoxide alarm. This will alert them if there is carbon monoxide in their home.

Be part of this national campaign with events, advertising and PR taking place across the country to help keep the nation Gas Safe. To get involved and order materials to raise awareness of gas safety visit www.gassafetyweek.co.uk. Alternatively email marketing@gassaferegister.co.uk.

 

Back in the beginning of August we wrote a post about the forthcoming Gas Safety week, which was set to kick off between the 16th and 22nd of September. Well time has flown since then, and its now only three more days until the week-long awareness campaign gets underway!

Set up by the Gas Safe Register, this week will see all areas of the gas industry - manufacturers, retailers, training companies, consumer bodies and even the public, make a special effort to inform about the importance of proper gas safety and the dangers from not taking proper care. So far of 2500 different people (including Access Training) have pledged their support toward the cause, and there's still plenty of time for you to do the same! Simply visit the website and sign up to pledge your support, and following that you'll be sent a supporter's kit to give you some ideas of what you can do in your area.

 

What is the Gas Safe Register?

Gas Safe Register is the official list of gas engineers who are qualified to work safely and legally on gas appliances. By law, all gas engineers must be on the Gas Safe Register. It replaced CORGI.

Registering with Gas Safe Register is a legal requirement for anyone carrying out gas work in the United Kingdom, Isle of Man and Guernsey. For more information and to register email register@gassaferegister.co.uk or call 0800 408 5577.

 

How to find an engineer

To make sure that gas appliances such as boilers, fires, ovens and hobs are fitted, fixed and serviced safely, only a Gas Safe registered engineer should carry out the work. If someone other than a Gas Safe registered engineer undertakes gas work, they are breaking the law and could put lives at risk.

To prove they are legally permitted to work on gas, all Gas Safe registered engineers have an ID card with their own unique licence number and a photograph. Those in the building industry must always check that engineers contracted to undertake gas work are on the Gas Safe Register.

To find or check an engineer go to www.GasSafeRegister.co.uk or call 0800 408 5500.

 

Access Training will begin a week long look at gas safety in our blogs, and may even throw in a few special offers for all budding gas engineers too. Gas Safety is an extremely important concern to us, and it is not something that should be taken lightly. Download your supporter's kit today and help spread the word of Gas Safety! 

The summer months are behind us and despite a few more days of good weather, homeowners will soon be getting ready to turn their boilers and central heating on for the first time since the Spring. Houses are going to need heating, and when these boilers need maintenance and replacement who's going to be there to pick up the slack? Your local plumber of course!

With plumbers and gas engineers expected to see a rise in business over the next few months, if you've been considering a change in career to one of these trades now is the perfect time to make it happen. Earn your plumbing and gas qualifications on one of Access Training's range of professional trade courses, following which you'll be able to apply to join the Gas Safe Register - a legal requirement of anyone working on gas appliances in the UK. You'll then find yourself in a world of work with plenty of variety - you'll be meeting new people every day and no two jobs will be quite the same. Not only that, but the rewards are great too - and these only get better if you take the extra steps to become a self-employed tradesman.

Winter might be coming, but life as a plumber/gas engineer certainly won't leave you out in the cold. To find out more have a look at the course section of our website or chat with one of our sales team on 0800 345 7492.

With Gas Safety week coming up soon Access Training will be highlighting the importance of gas safety in our blog in the lead up to 16-22 September. However this isn't always going to be in a fun and educational way - yesterday the Heating, Ventilating & Plumbing magazine reported two separate instances of dishonest traders either fined or leaving people at risk because the tradesmen were not Gas Safe Registered.

The first article reports that a self-employed heating installer from King's Lynn was fined for illegally carrying out sub-standard gas work at two homes in Norfolk. Ryan Neale, trading as R. Neale Plumbing and Heating, installed gas appliances and pipework despite not being Gas Safe registered. He was fined a total of £2,000 and ordered to pay a further £1,000 in costs after pleading guilty to two separate breaches of the Gas Safety (Installation and Use) Regulations 1998 for his work at each property – four charges in total.

Secondly, a London heating installer was also fined for illegal and unsafe gas work. Abhishev Yadav, 28, of Greenwich, installed a boiler at a property on Penywern Road, Earls Court, that was later classed as ‘at risk’ because the flue was not properly sealed or secured. He carried out the work in March 2011 on behalf of his firm Ability Heating, while falsely claiming to be Gas Safe registered. He was was fined a total of £7,500, and ordered to pay £2,500 in costs plus a £120 victim surcharge for breaching the same regulations.

In response to these stories,  Gas Safe Register chief executive Russell Kramer has issued this statement: "Every Gas Safe registered engineer has an ID card which shows who they are and the type of work they are qualified to carry out. Customers should ask to see this and check the engineer is qualified to do the job in hand. You can also check your engineer by calling us on 0800 408 5500 or by visiting www.gassaferegister.co.uk.

Joining the Gas Safe Register is a legal requirement of any tradesman installing, maintaining and decommissioning gas appliances and can only be achieved when they have been awarded all of the relevant gas qualifications. The register can also be used by homeowners to search for a suitable tradesman in their area, or to ensure that the one they've hired is a legitimate gas engineer. 

If you're interested in earning the qualifications to become a qualified gas engineer, Access Training offer comprehensive gas courses that will have you well on your way to success. Completing our courses successfully will give you the skills and knowledge to join the Gas Safe Register and start a new and rewarding career. To find out more give us a call on 0800 345 7492.

 

The Gas Safe Register is preparing for its annual Gas Safety week, which is due to take place between the 16th and 22nd of September.

The week is geared to raise awareness of gas safety and the importance of taking care of your gas appliances. While it is co-ordinated by the Register, it is also supported by many areas of the gas industry - including retailers, manufacturers, consumer bodies and the public. They are inviting anyone looking to get involved to pledge their support online via the website, where they will then receive a supporter's kit to help spread the word of gas safety.

Twenty one million households in United Kingdom, Isle of Man and Guernsey use gas for heating, hot water and cooking, yet we take it for granted that our boilers, cookers and gas fires are safe. Badly fitted and poorly serviced gas appliances can cause gas leaks, fires, explosions and carbon monoxide poisoning.

Did you know?

  • Every year thousands of people across the UK are diagnosed with carbon monoxide poisoning. It is a highly poisonous gas. You can’t see it, taste it or smell it, but it can kill quickly with no warning. Gas Safe Register estimate that there are a hard core of around 7,500 illegal gas fitters operating across the UK and up to 250,000 illegal gas jobs may be carried out each year (Gas Safe Register Research 2009).
  • Although there is awareness that gas appliances need to be safety checked annually, 43% of Britons don’t do it, and 10% have gas appliances which have never been checked (Gas Safety Week Research 2011).

Access Training have already pledged their support to Gas Safety week, so look forward to more articles and tweets from us about it in the run up to September!

 

Easy Safety Cert are offering registered Gas Safe engineers a free trial of their gas safety inspection software, available as an app for iOS devices such as an iPad or iPhone, with an Android version due to launch within the next six weeks.

Engineers will be able to complete, send and store gas safety inspections while on the go. They will also be access their own secure online database, which stores completed certificates along with client and job details and automatically sets 12-month inspection reminders.

The trial allows three free inspections; beyond that, engineers can purchase inspections on a pay-as-you-go basis. There are no subscription fees or extra charges for multiple users, devices, support or updates.

Bianca Dainty, director of Easy Safety Cert, said: "We’ve always had a key focus on usability and quality. The new features found in the iPad and updated iPhone apps are examples of our commitment to bringing the best technology to our customers."

The app can be found by searching "ESC GasCert" in the App store.

Full story: Daily Mail - 'Incompetent' plumber causes gas explosion

A 32-year old plumber is currently in course after he caused a gas explosion which resulted in a home being 'blown from its foundations' and leaving the couple inside with serious burns.

While converting the former kitchen of Martyn Moody and his wife Theresa's luxury home in the Lincolnshire Wolds into a dining room, plumber Daniel Hickling cut off and capped the protruding gas pipe, burying it under the floorboards. However during the work he punctured the pipe and failed to carry out a straightforward check to ensure there had been no damage to it.

Later the couple smelt gas and began searching their home. During this time Mr Moody flicked on a cigarette lighter and the flame ignited, causing a massive explosion with such force that the entire building moved an inch. Mr Moody, a retired construction and electrical tradesman spent two weeks in hospital undergoing skin grafts after suffering serious burns to his hands, arms and scalp. His wife suffered burns to her legs and feet nut was released from hospital after two days.

The home, which the couple had built for themselves in 1993, sustained so much damaged that it had to be almost completely rebuilt. It was a year before the couple were able to move back in. They were also left £100,000 out of pocket after being found to be underinsured on their contents insurance and thus had to cover some of the loss themselves.

Lincoln Crown Court were told by prosecutor James Puzey that Hickley was "incompetent to carry out this work and it was carried out incompetently. That led directly to an explosion which almost destroyed the property and caused serious injury to the householders." It was also revealed that he was not a registered Gas Safe engineer and failed to tell the couple this when he agreed to do the work. However he claims that he did not know he would be working on a gas pipe and as such never put himself forward as properly qualified.

Hickley has admitted to breaching the 1998 Gas Safety Regulations and performing work to an inappropriate standard. Recorder Helen Malcolm QC has adjourned the case to a future date when she will give her ruling on the case following these two days of evidence.

-----

Cases like this are a prime example of why having the right qualifications to do the job is vital. Simply having plumbing qualifications is not enough if you are potentially going to work with gas pipes, as not only are you breaking the law and could potentially face prosecution but you are also endangering the lives of your customers. If you train as a gas engineer, becoming Gas Safe Registered isn't just advised, it is essential proof that you are legally competent to work with gas pipes and gas appliances safely. If you are a plumber and would like to learn more about gas engineering, gaining the qualifications required to be eligable for Gas Safe registration, we at Access Training offer comprehensive gas courses to ensure you are fully trained. To find out more click the link or give us a call on 0800 345 7492.

Combining trades, such as taking both a plumbing and gas engineering course, has always been an ideal way of making sure you are never short work as a qualified professional. It's something we've always encouraged at Access Training, but it's also something that seems to be becoming more and more essential in today's working environment.

The AA training their patrol officers in plumbing emergencies, for example, is a sign of the recession and the need for employers to diversify their workers. With British Gas also now venturing into other areas such as blocked drains, electrics and white goods repairs, it is obvious that in today's climate you cannot rely on a single trade only for a living. I feel grateful that the time I had spent on the tools, only doing plumbing and heating installations for 25 years (single trade only) is now a thing of the past.

It is said there is a major shortage of qualified tradespeople to cover the demand of work that is out there. I suppose I was one of the few tradesman that was never out of work, mainly doing new build but also refurbishments, commercial and industrial installations. I thought I was diversifying at the time, but it would seem even that wouldn't be enough these days. In doing these lines of work I had gained the required qualifications and felt I had gained a vast knowledge of these areas. But I admit that I feel I could not know all there is to known in these fields, with products and techniques regularly changing along with different regulations you need to comply with.

So to think of these mechanics who have to do plumbing course, I don't think it's detrimental to those qualified tradespersons who are of high quality, conscientious and only charge a fair fee for their work. They should not be worried about losing work to companies like British Gas and the AA, but what would be a point of concern is to what level they will be taught to.

Are you a plumber or gas engineer looking to expand your resume in order to take on more work? At Access Training we train both people with no prior experience to become fully qualified in their chosen field and experienced tradesmen looking to train in a new area of work. Each course will give you a professionally recognised qualification, providing you with the skills and knowledge you'll need for any task. For more information, contact us at 0800 345 7492.

- Mark Lewis

The current economic climate has put strain on the purse strings of many, resulting in far fewer individuals finding themselves in a position where they can afford to buy their own home. This is music to the ears of Gas Safe qualified engineers as well as those currently completing gas courses, as landlords have strict legal requirements they must fulfill before renting out their property to ensure the safety of the gas system.

In a rented property the landlord is responsible for ensuring that the pipe work, appliances and gas flues are maintained and kept in a safe condition. It is a legal requirement that a gas safety check is carried out every year; this must be carried out by a registered Gas Safe engineer who has attended the relevant gas courses. The landlord must then give their tenants a copy of the gas safety record within 28 days of the check being completed, or prior to them moving into the property.

The employment and business opportunities available for qualified gas engineers are currently plentiful. Only Gas Safe registered engineers are permitted to perform these checks, ensuring a ready supply of work. This is just the type of work you could be carrying out if you are seriously looking into gas courses with Access Training. The courses are delivered with commercial work in mind, so carrying out the necessary checks on a landlord’s property as well as completing paperwork can be performed with ease.

If you would like to enter this growing industry then there really is no time like the present. Enquire with us today about becoming a qualified gas safe engineer and we will help you to decide which of our gas courses is best suited to you.

Believe it or not, despite all the extensive media coverage at the time, many people are still unaware that the Corgi accreditation, which regulated the work carried out by gas fitters, has now been replaced by Gas Safe.

The Corgi Register changed to the Gas Safe Register back in September of 2008, after the HSE conducted a study which established the need for a new system to cope with the increase in the number of homes using gas in the UK (about 21 million). More importantly, it was designed to improve the statistics for death and injury resulting from gas installations. It was felt that a new Gas Safe Register would increase public awareness about the dangers of carbon monoxide poisoning.

Stephen Manley, an Inspector for the HSE, referred to the need for more people to be aware of the change from Corgi Registration to Gas Safe Registration: “It is illegal for an unregistered person to carry out work on a gas appliance. When unqualified workers try to bypass the law in this way they are not only putting themselves at risk of prosecution and a large fine, they are also putting their customers' lives at risk.

"Working with gas appliances requires a great deal of skill and knowledge, it is also potentially very dangerous. Only qualified and registered engineers should attempt it.

Paul Johnston, the Chief Executive of the Gas Safe Register, commented: "To fit, fix or service gas appliances… that person [needs to be] Gas Safe Registered [not Corgi Registered]. You shouldn't take any risks; badly fitted and poorly serviced gas appliances can cause fires, explosions, gas leaks and carbon monoxide poisoning".

So, if you are looking to become qualified as a gas fitter, you need to become Gas Safe Registered. Access Training offer the simplest way to get Gas Safe Registered quickly and safely; our gas training courses come with a guaranteed work placement with a reputable Gas Safe Registered company, giving you the skills and confidence to fit gas appliances safely. However, just remember that it’s the Gas Safe Register and not the Corgi Register you really need to be a part of.

For comprehensive training enabling you to become Gas Safe Registered, contact Access Training today on 0800 345 7492. We have an enormous range of industry accredited trades training courses, which will teach you everything you need to know.