Full story: Daily Mail - 'Incompetent' plumber causes gas explosion
A 32-year old plumber is currently in course after he caused a gas explosion which resulted in a home being 'blown from its foundations' and leaving the couple inside with serious burns.
While converting the former kitchen of Martyn Moody and his wife Theresa's luxury home in the Lincolnshire Wolds into a dining room, plumber Daniel Hickling cut off and capped the protruding gas pipe, burying it under the floorboards. However during the work he punctured the pipe and failed to carry out a straightforward check to ensure there had been no damage to it.
Later the couple smelt gas and began searching their home. During this time Mr Moody flicked on a cigarette lighter and the flame ignited, causing a massive explosion with such force that the entire building moved an inch. Mr Moody, a retired construction and electrical tradesman spent two weeks in hospital undergoing skin grafts after suffering serious burns to his hands, arms and scalp. His wife suffered burns to her legs and feet nut was released from hospital after two days.
The home, which the couple had built for themselves in 1993, sustained so much damaged that it had to be almost completely rebuilt. It was a year before the couple were able to move back in. They were also left £100,000 out of pocket after being found to be underinsured on their contents insurance and thus had to cover some of the loss themselves.
Lincoln Crown Court were told by prosecutor James Puzey that Hickley was "incompetent to carry out this work and it was carried out incompetently. That led directly to an explosion which almost destroyed the property and caused serious injury to the householders." It was also revealed that he was not a registered Gas Safe engineer and failed to tell the couple this when he agreed to do the work. However he claims that he did not know he would be working on a gas pipe and as such never put himself forward as properly qualified.
Hickley has admitted to breaching the 1998 Gas Safety Regulations and performing work to an inappropriate standard. Recorder Helen Malcolm QC has adjourned the case to a future date when she will give her ruling on the case following these two days of evidence.
Cases like this are a prime example of why having the right qualifications to do the job is vital. Simply having plumbing qualifications is not enough if you are potentially going to work with gas pipes, as not only are you breaking the law and could potentially face prosecution but you are also endangering the lives of your customers. If you train as a gas engineer, becoming Gas Safe Registered isn't just advised, it is essential proof that you are legally competent to work with gas pipes and gas appliances safely. If you are a plumber and would like to learn more about gas engineering, gaining the qualifications required to be eligable for Gas Safe registration, we at Access Training offer comprehensive gas courses to ensure you are fully trained. To find out more click the link or give us a call on 0800 345 7492.
Following on from part 1 we will now look at what training courses are available to you, as well as factors such as their cost and duration.
At Access Training we deliver many construction courses, including;
Each course can vary from a one week taster course to a total of eight weeks, depending on the outcome you wish to achieve. The one week taster course will give you a good insight to your chosen trade, basic use of tools and basic techniques. Then there are two and three week courses which obviously involve a more in depth look at the particular trade. Each of these courses can give you a recognised qualification from City & Guilds.
The eight week course will give you a CAA Level 2 (Construction Awards Alliance) and potentially a NVQ diploma, both of which are again highly regarded and recognised C&G qualifications. The cost of each course varies, so I suggest you contact Access Training Wales and speak to one of the course advisors.
OK you’ve finished the course you’ve gained your qualification, what next? The truth is finding work is not as difficult as you may think. Most trainees after leaving Access Training start by doing small jobs for friends, family and neighbours. This will build your confidence and give you some indication of how long a job will take. Best of all you will be under no pressure from family to complete by a certain deadline.
Then there are construction “agencies” that employ people to work on various jobs. They’ll find you the work, but be prepared to work maybe one week here, two weeks there and so on. This is a great way of gaining experience quickly and you will be on a fixed hourly rate, usually around £12 per hour.
So now that you’ve gained both experience and confidence, it’s time to go on your own. This is where you can earn a lot more money – it’s not uncommon for a good tradesperson to earn between £600-800 per week. Keep your options open, if you completed a bricklaying course don’t think that you can only lay bricks. Bricklayers can usually lay patios, decorative work indoors, build archways and more. If you completed a plastering course, plasterers can usually fix coving up, lay screed floors etc. One very lucrative area from a plastering point of view is “Venitian” or “Polished” plastering. There is a niche in the market for this type of work, if you have good trowel skills you can learn this method relatively quickly, and the price for doing this work is roughly £60 per square meter. So the choice is yours – there is work about for good tradespeople, so if you feel you need a career change then go for it!
If you need more information contact Access Training Wales on 08003457492.
- Richard James
Combining trades, such as taking both a plumbing and gas engineering course, has always been an ideal way of making sure you are never short work as a qualified professional. It's something we've always encouraged at Access Training, but it's also something that seems to be becoming more and more essential in today's working environment.
The AA training their patrol officers in plumbing emergencies, for example, is a sign of the recession and the need for employers to diversify their workers. With British Gas also now venturing into other areas such as blocked drains, electrics and white goods repairs, it is obvious that in today's climate you cannot rely on a single trade only for a living. I feel grateful that the time I had spent on the tools, only doing plumbing and heating installations for 25 years (single trade only) is now a thing of the past.
It is said there is a major shortage of qualified tradespeople to cover the demand of work that is out there. I suppose I was one of the few tradesman that was never out of work, mainly doing new build but also refurbishments, commercial and industrial installations. I thought I was diversifying at the time, but it would seem even that wouldn't be enough these days. In doing these lines of work I had gained the required qualifications and felt I had gained a vast knowledge of these areas. But I admit that I feel I could not know all there is to known in these fields, with products and techniques regularly changing along with different regulations you need to comply with.
So to think of these mechanics who have to do plumbing course, I don't think it's detrimental to those qualified tradespersons who are of high quality, conscientious and only charge a fair fee for their work. They should not be worried about losing work to companies like British Gas and the AA, but what would be a point of concern is to what level they will be taught to.
Are you a plumber or gas engineer looking to expand your resume in order to take on more work? At Access Training we train both people with no prior experience to become fully qualified in their chosen field and experienced tradesmen looking to train in a new area of work. Each course will give you a professionally recognised qualification, providing you with the skills and knowledge you'll need for any task. For more information, contact us at 0800 345 7492.
- Mark Lewis