ELECSA and NICEIC operators NAPIT and Certsure have come together to create a single place consumers can go to find a fully qualified electrician. This easily identifiable mark will cover all full scope Part P registered electricians and is planned to roll out this year.

The two associations both created their own individual registers last year, but have since realised the advantages of creating a single one to avoid confusion. In addition to this, both feel that the attention given to the launches has proved a distraction from key issues in the electrical industry - namely safety and quality. To overcome this, NAPIT and Certsure met back in November to discuss the way forward in terms of promoting competent, qualified electricians.

The proposal that has been put forward is anticipated to include all licensed Electrical Competent Person Scheme Operators in England and Wales who are approved by the DCLG to run an electrical certification scheme, who have been said to be "happy with the plans" in principle. The schemes will continue to operate individually in accordance with current Building Regulations, however they will now also promote the new quality mark as well as their own.

Emma Clancy, Chief Executive Officer of Certsure, said consumers will now benefit from a single point of reference, making it far easier for consumers to locate a registered electrician in their area. NAPIT Chief Executive Michael Andrews added that the new register will also "ensure that electrical installers continue to be able to take advantage of the choice and value for money that comes as part and parcel of healthy competition in the marketplace"

When becoming a fully qualified electrician, gaining your Part P qualification and joining a Competent Persons Scheme is an incredibly important step to take. It ensures consumers that you are fully qualified and able to perform electrical installations, setting you apart from the so-called "cowboy builders" that plague the industry. Not only that, but a Part P qualification allows electricians to self-certify their own work. This means you can sign off on any installations without having to inform your local building authority - saving you a considerable amount of money in inspection fees.

The Part P qualification, along with all electrical qualifications needed to become a full-time electrician, is available as an intensive course from Access Training Academies. If you would like the steps to become a fully-fledged electrician, take a look at the courses we have on offer and give us a call on 0800 345 7492 today.

The Green Deal has just had its first birthday, and unfortunately it hasn't been such a great year for the UK Government's flagship energy efficiency programme. 

Official figures have revealed that only 626 houses have live Green Deal plans in place, which is nowhere near the 10,000 figures minsters were expecting to be in place. As of December, only a total of 1,612 houses had made plans overall.

While assessments had never really been on the rise, they notably declined by 21% during December, which the government attributed to the Christmas holidays. However several leading green energy groups have spoken out against the Green Deal's poor statistics, stressing that the Government needs to try a lot hard in order for it to succeed.

The Federation of Master Builders has given the first year of the Green Deal a "report card" rating of two out of five, commenting that is has "not achieved the desired results in its first full year, with the majority of SME installers and home owners failing to engage". Chief Executive Brian Berry called the financial package "unattractive to most consumers". He also went on to say how the programme simply doesn't stack up against other high-street money saving alternatives such as loans and credit cards available at more competitive rates. His suggestions to improve the Green Deal were:

"The single most effective measure to kick-start demand would be to reduce the rate of VAT from 20% to 5% on all domestic repair and maintenance work, including energy-efficiency improvements. This would be a real incentive to home owners across the board to think about getting a professional tradesperson in to quote on a variety of repair and maintenance projects."

Meanwhile the UK Green Building Council also had things to say about the figures, calling it a "a wake-up call to the Government" that it is not delivering. Chief Excutive Paul King suggested that the Government must "recognise energy efficiency as a national infrastructure priority and be prepared to delve into its purse to make its flagship policy more appealing through stronger incentives and more attractive finance options"

But despite its failings, the Government have announced that they plan to stick by the Green Deal, and believe that although its hard a slow start (to put it lightly) 2014 will definitely be the year it takes off. Climate Change minister Greg Barker "acknowledged" that things hadn't developed the way the government had anticipated at a conference yesterday, he still though its first year had been an "encouraging start".

He also commented that the supply chain was now in place, with more than 125 Green Deal providers at the ready along with 2900 individual advisers and 2300 organistations officially approved to carry out installations. Procedures are also set to be simplified by the newly established Green Deal Working Group, with further alterations and improvements to be announced over the coming weeks.

So will 2014 fare better for the Green Deal? It's too early to say, but if these numbers are anything to go by then it doesn't look like it can do much worse.

Though all of Great Britain is shaping up for a construction boom that is predicted to last throughout 2014 and beyond, it's great to hear that the home of Access Training Academies is leading the way. The regional government is reporting that the construction industry here is outperforming the UK as a whole, once again proving that if you're thinking of learning a new trade from a construction training course - now is the time to do so. 

Wales has shown an 8.7% increase over the last four quarters in comparison to the previous four, according the date from the Office of National Statistics. Short term quarterly movements in the construction industry also showed output as increased in Wales by 2.8%.

Welsh economy minister Edwina Hart said: “Together with the latest figures showing an increase in the number of construction jobs in Wales, today’s figures show that the construction sector in Wales is outperforming the UK as whole. Also the Index of Production for Wales shows a 3.1% increase when comparing the latest four quarters to the previous four quarters, while UK output fell by 1.6%.”

With new build projects now starting all across Wales, demand for bricklayers, plasterers, carpenters and tilers is at an all-time high. This boom is expected to continue for years to come, giving skilled labourers job security as well as an enviable wage and a varied and active line of work. However a college course can take years to provide you with the skills and qualifications to turn professional, which is why our range of intensive construction courses is the best solution. We train students to a professional standard, complete with the relevant qualifications, in a fraction of that time - without skimping on any of the quality. 

We also offer a wide variety of scope with our courses - if you'd like to intensively train as a carpenter then our professional carpentry course is right there for you, however if you'd like to try a variety of different trades then you can also build up your own multi-skills course. Just let us know what your plans are and we'll do our best to accommodate them.

To find out more give us a call on 0800 345 7492 or fill in the information form provided on the website. One our of advice team will be in touch shortly to answer any outstanding questions you might have.

One of the most important parts of any good roofing course (or construction training course in general) is knowing what the right safety measures to put in place before you even begin. However unfortunately there are still companies out there that ignore this and eventually pay the penalties - such as this roofing firm that have appeared in court after being filmed breaking the law by the BBC's investigative programme Watchdog.

Oldham firm Renov8 (North West) Ltd. and company director Darren Potts were prosecuted by the HSE (Health and Safety Executive) after the show revealed footage of a worker walking around a sloping roof of a property in Droylsden using a pressure washer without any means in place to prevent them slipping and falling to the ground below.

Mr Potts was filmed watching the work from below. The two men were also seen walking on the roof of another property in Salford, with no scaffolding or other measures in place to prevent injury in the event of a fall.

Further investigation from the HSE found that Renov8 did not have any employers' liability insurance, which is a legal requirement for all firms. This means that had the employee gotten injured, he would have not been able to claim compensation. The company pleaded guilty to two breaches of the Work at Height Regulations 2005 and failing to have employers liability insurance, resulting in a fine of £1000 and £1225 in prosecution costs. Mr Potts himself was sentenced to 200 hours of community service and also had to pay £1225 in costs.

Speaking after the hearing, HSE Inspector Matt Greenly said:

"Renov8 should never have allowed work to be carried out on the roofs of the two bungalows without having suitable safety measures in place. Company director Darren Potts risked not only his own life but the life of an employee by clambering around slippery roofs. Renov8 could easily have hired scaffolding for the work but failed to do this, despite using scaffolding on similar properties in the past. The company also ignored the law relating to employers’ liability insurance, meaning the employee wouldn’t have been able to claim a penny in compensation if he had been injured."

Via HSE

As we've previously mentioned, Access Training have made a few changes to the way we run the Unvented Cylinders plumbing course recently. With the new City & Guilds syllabus our course follows, students are now required physically commission and maintain a cylinder in order to achieve the qualification. This is important as it will make sure candidates are physically familiar with unvented cylinders rather than just having a theoretical knowledge of how to handle them. Knowing in theory is all well and good, but this is one area in particular that can go wrong without the right skills and know-how.

An Unvented Cylinder is a hot water storage system that relies on storage cylinders fed directly from cold water mains and do not incorporate a vent pipe to relieve excess build-up pressure to atmosphere. The pressure for the hot water system is then derived from the mains pressure supply rather than a cold water storage tank. The advantages of using such a system include:

• Balanced pressure in both hot and cold taps for showers
• Higher water pressures available for hot taps
• No storage cistern, eliminating any risk of contamination
• Can be fitted anywhere in the house, making them suitable for one-storey dwellings
• Quicker to install with less pipework and no cold storage tanks needed in the loft
• Can possibly be used with smaller diameter pipework
• Gives architects and service designers greater flexibility of design

Unvented cylinders are also the only systems currently used with renewable energy supplies such as ground & air heat pumps and underfloor heating, due to their nature of being almost 100% energy efficient. This makes them even more of an important thing as households strive to become greener and save energy (as well as money!).

However despite these numerous advantages installers should still show great caution and care when dealing with unvented cylinders, as failing to properly install them is extremely dangerous. Unvented hot water systems usually operate above atmospheric pressure and unless the right measures are taken to prevent overheating, the results can be quite explosive to say the least. Just have a look at this video of what can happen if adequate checks and protection haven't been made:

VIEW ON YOUTUBE

But don't let this video put you off them. As long as they are installed correctly with all of the proper safety precautions in place unvented cylinders are perfectly safe. All plumbers handling unvented cylinders are required to be qualified in accordance with Part G of the Building Regulations, which can be achieved through the Access Training Academies Unvented Hot Water Cylinders course.

2014 is already shaping up to be a big year for Access Training Academies, and today (the 13th January) marks the first steps we'll be taking to make your training experience here even better. This year ACS gas assessments will be returning to our Cardiff training centre.

Now students that complete their gas training at Access will be able to complete their Logic ACS (Accredited Certification Scheme) gas assessments here. ACS is the industry recognised and accepted route for students to enter into the gas industry, earning their gas certificate which is needed to become a member of the Gas Safe Register. This itself is a legal requirement to be able to work on all gas installations and appliances in the UK. These assessments will not only be available to those who have completed an extensive gas course here, but is also open to others who may have completed a gas course elsewhere.

Students will be able to complete both the written and practical assessments required to qualify, covering the CCN1 Core Domestic Gas Safety module and then any of the additional appliance assessments relevant to your area of work. This includes the CENWAT (Central Heating Boilers & Water Heaters) qualification, CKR1 (Cookers), HTR1 (Gas Fires) and more. For a full list of what we can offer you here at Access, please get in contact.

To find out more about ACS gas assessments, our plumbing training or any of the many other trades training courses we provide here at Access please get in contact with our course advice team on 0800 345 7492 or via the form provided on this website. They'll be more than happy to answer any further questions you might have, as well as arrange of a tour of our facilities so you can get a first-hand look at what we do.

As we draw to the end of 2013 and all look forward to Christmas and the New Year, the staff at Access Training Academies would like to wish everyone a safe and happy holidays and a big thank you for all the support you've given us over the year. Access Training has continued to grow and provide the best trades training courses we possibly can. Look forward to more changes to our plumbing, electrician, gas and construction courses next year to make them even better, and we'll look forward to having you come and train with us.

Student training will resume on the 6th January, but in the meantime we have already started booking places for courses in 2014. If you fancy yourself as a bit of a handyman and would like to take it to the next step and become a professional tradesman, take the time to browse our website and have a look at the courses we offer.You can also get more information by calling 0800 345 7492 or alternatively filling in the information form found to the side of the page. Your details will be passed on to one of our professional course advisers who will be happy to answer any questions you might have.

It's a brand new year, and the perfect time for a brand new career.

With the planned building of millions of new homes across the UK well underway, many are also expecting a rise in new buyers over the next few years as Britain enjoys a well-needed construction boom. 

With this in mind, OFTEC - the group responsible for maintaining standards across the domestic oil heating and cooking industry, is offering some practical advice to those first-time buyers who may soon begin their search for the perfect home. This advice isn't just aimed at buyers of brand new homes either - it's especially geared toward those who may take on an existing home and not know what to look for in terms of their heating/hot water systems. Heating problems may be difficult to spot with the naked eye, especially to someone who hasn't done a plumbing training course or extensive gas training, but OFTEC offer these handy bits of advice to make sure you can walk into your new home with both buyer's satisfaction and peace of mind.

Be sure to check the boiler

Has it has had any problems in the past? When was the last time it was serviced? Boilers should be serviced annually for a number of reasons, mainly to make sure that is running efficiently and more importantly safely. If you are really unsure, it might be worth asking the current homeowner if you can have it looked at beforehand by a professional gas engineer.

Check the Energy Performance Certificate (EPC)

These give potential buyers valuable information about the property's typical energy usage and costs. An EPC grades the property’s energy efficiency from A to G and contains two particularly important areas - current features and recommendations for improving the home. The current features section lists the most significant energy-related features of the property and gives them a star rating based on cost. The recommendations give more information about each energy efficiency measure recommended and explains in general terms how it would improve the energy efficiency of the home.

How much do you know about the hot water system?

How is it heated? It might be worth checking the water pressure to make sure it is all up to scratch.

Know the warning signs

Occurances such as stained/smoke damaged areas around the boiler and flue are not to be ignored and should be treated VERY seriously. If any properties you view have these, make sure that a registered gas safe engineer doesn't just look at them for your safety - but also for the safety of the current homeowners. Other telltale signs of bad maintenance include leaks and staining on carpets near radiators.

Getting the house properly checked

OFTEC recommend getting valuations, an RICS homebuyer’s report or even a full structural survey. The valuation carried out by a mortgage company is not a survey, and will not inform you if there are any defects that materially affect the property’s value.

However the most important thing OFTEC recommend is trusting your instinct. if you think there is something wrong with the property, then don't just discard those feelings. However if you get a good feeling this may be the house for you - minor problems can easily fixed by competent tradespeople, but be sure to make sure the costs aren't racking up before you've even moved in!

Having fully completed his professional electrician course, ex-rugby player and Access Academies student Xavier Rush has now turned his attention towards retraining in a second trade and begun a plumbing training course with us. We caught up with him during the fourth week of his six week course to find out how he's getting on and how the plumbing training has differed from his previous experience with the electrical training course. One thing's for sure, it's a very different experience to playing rugby for both the All Blacks and Cardiff Blues...

How are you finding the change from electrical work to a plumbing course?

It’s definitely the most practical I’ve done so far! There was a lot of theory with the electric but theory there is here is probably a lot easier to grasp. But then it’s also far more hands on too. It’s very busy – we’ve been working with low carbon steel and a lot of copper as well. I fitted a bathroom last week which was enjoyable – it’s nice to step back and see the results sometimes.

But a lot like the electric these are intense course and you pick up a lot of information and skills quickly. It helps that you’re learning from people who’ve been in the industry a long time.

Had you done any plumbing before starting the course?

No, before this I didn’t have a thing – I couldn’t even stop a leak. You’ve got to pick it up quite quickly as there’s no one there holding your hand. Once you’ve got an understanding of it all it gets a lot easier. It’s just knowing what fittings do what and what products you’re working with, that sort of thing.

Have you found anything especially difficult over the last four weeks?

I suppose it just takes you a while before you get competent with everything really. Nothing is truly mind boggling. There were a few issues fitting a bath, but it’s the kind of stuff you can get your head around.

How have the tutors been?

They’ve been great and a really big help this week especially. They don’t baby you at all, but make sure to tell you exactly where you’ve gone wrong – which is exactly what they need to do. If you were working in someone’s house and you spring a leak and their lounge ceiling falls in you’re going to be in trouble. So you’ve just got to know. It’s just like anything – the more you practice you have, the better you get. Its good being here because if you’re going to make mistakes make them here, that way I can waste your copper rather than mine!

How have you found the studying at home element of the course?

Like I said, you are picking up a lot of information in a short time so while you’re here you’ve really got to apply yourself for the six weeks. There’s a lot of going home, revising, getting ready for exams because if you don’t do the homework you don’t get the passes. You have got to read the book and retain that information. I’ve had many a late night drinking coffees at Starbucks looking like a bit of a geek.

And finally, how much time do you have left here before you’re all done?

I’ve got two more weeks after Christmas. It’s been an intense four weeks so it’ll be nice to have a bit of a break and then come back and hit it again. Because we’ve done so much over the last few weeks and put so many fittings together you should be able to retain a lot of the information. And then after that that’ll be it for me…for now! I might come back and do the one week electrical testing course just to freshen up on that. But it’s just brilliant to come here and reskill so quickly as an older person. I did carpentry when I left school but to think now I’ve got plumbing and electric qualifications backing that up. And to feel confident with that within ten weeks is berserk really – they’re skills you’ve obviously got for life.

I can look at stuff in houses now and understand it. Obviously it doesn’t give you all the experience – you’re still going to go out there and make mistakes but it’s given me a really good grasp of both industries, both the electric and the plumbing.

As Xavier approaches the end of his Access Academies training, we'll be talking to him again in the new year to discuss his overall experiences and his plans for the future. In the meantime if you have any questions you'd like to ask him about changing careers and retraining in a new trade, please let us know over on Twitter or Facebook. If you yourself would like more information on Access' extensive range of trades training courses (also including gas engineering, carpentry, bricklaying, plastering, tiling and painting/decorating), please get in contact with one of our course advisers on 0800 345 7492.