100% customer satisfaction is one of the main things we aim for here at Access Training, so it always pleases us to hear feedback from our former students on their course experience and the training company as a whole. You can view some of the older testimonials we've received on this very website, but below is one we received via email recently:

"I recently completed six weeks of training at Access, which included tiling, plumbing and electric. This training has allowed me to set up my own property maintenance and domestic electrics business as well as join a Competent Person Scheme.

None of this would have been possible without the support and guidance of the excellent staff in Cardiff. Quite simply they are some of the most down to earth, knowledgeable and professional people I have ever had the pleasure to be involved with.

The whole set up is a fantastic learning ground, particularly for military personnel and I have since written to our regional training advisors within the RAF who deal with resettlement training. The transition to civilian life could have been dull and daunting, but it’s been quite the reverse and the staff are a credit to their respective trades AND the company as a whole.

Often the administration side of an organisation gets missed when it comes to thank yous but the staff were ambassadors, making the whole process both simple and cost effective.

Not only have I recommended Access Training to a number of colleagues I look forward to returning in the future to extend my electrical qualifications further."

- Dougie Bon (Retired RAF Squadron Leader)

If you would like to take the steps toward a new career in a trade, give us a call on 0800 345 7492. We offer training courses in electric, plumbing & gas, plastering, tiling, carpentry, bricklaying, decorating and more. Each will provide you with the necessary qualifications to achieve a successful and enviable career in your chosen trade. You are also welcome to come take a visit of our Cardiff training centre, so you can see first hand the facilities and quality of teaching that we offer.

NO! It’s not, is the simple answer.

The number of homes installing cavity wall insulation has crashed by 97% since the government's flagship energy–efficiency scheme was introduced, new figures have revealed. Previous energy-efficiency schemes meant cavity wall insulation – one of the cheapest ways of cutting energy bills and climate-warming carbon emissions, was heavily subsidised or free. But under the Green Deal, which aims to upgrade the efficiency of 14m homes, households have to take out a loan to pay for the measure.

Figures from the Cavity Insulation Guarantee Agency, which monitors the issue of installations and guarantees, show that only 1,138 installations were completed in April 2013, down from 49,650 in April 2012. The government's own impact assessment predicted in January 2012 that cavity wall insulations would collapse by 67%, but the reality has far outstripped this estimate. Government data shows that 1.4m cavity wall insulations are needed to meet its carbon targets.

This crash shows a "desperate need for financial stimuli for the Green Deal".

A spokesman for the Department of Energy and Climate Change said: "The Green Deal is an ambitious, long-term programme designed to deliver home improvement in Great Britain on an unprecedented scale." He noted that a cashback scheme currently offers £250 for cavity wall insulation, although this will not cover the total cost. "Additional help for this type of work may also be available for people in hard to treat properties, and those on benefits or low income," he added.

Luciana Berger, the shadow minister for climate change, said: "This staggering collapse in the number of energy-efficiency installations is a disaster for our economy and a body blow for hundreds of small businesses across the country. This is all the more damaging when there are at least 5.8m homes in the UK that still need cavity wall insulation, according to the government's own estimates."

The government's impact assessment also predicted a drop of 93% in loft insulations, the most cost effective energy-efficiency measure of all!

- Mark Jenkins

Research by the Electrician Technician Registration has found that "a lack of recognised standards for industry competence" is restricting both electricians' ability and their eventual career progression.

The study looked at how electricians' perceived their professional and discovered many were confused about what constitutes "competence" and which industry bodies could be called upon for careers guidance. Participants in the research also claimed that the vast amount of electrical qualifications available to them made it difficult to decide which routes of study to take in order to gain professional recognition. They also agreed that without a visible benefit of pursuing such qualifications, they feel no reason to aspire toward them.

In an attempt to address these concerns, the Technical Advisory Panel and Steering group (TAPS) - a collaboration of bodies including the IET, the Engineering Council, Electrical Contractors' Association and the Joint Industry Board, will now act on these key issues highlighted in the research;

• Developing careers pathways to enable professional recognition for electricians to progress to engineering technician.
• Adopting a 'one body' consistent approach to providing advice on a national scale with an electrician technician membership package.
• Mapping the engineering technician professional standards to the established industry competence card schemes, NVQs and apprenticeship frameworks.
• Promoting the benefits of gaining engineering technician recognition to support career progression.

New research from the Department of Energy and Climate Change (DECC) has revealed that taking energy saving measures on your home (via the Green Deal or otherwise) could see a significant rise in its value.

The report took into account over 300,000 property sales in England between 1995 and 2011, making it the most comprehensive research in this area to date. The results found that on average house value could be increased by up to 14%, with that figure even reaching 38% in certain parts of the country.

For an average home in England, improving its EPC (Energy Performance Certificate) from band G to E, or from band D to B, could mean adding more than £16,000 to the sale price of the property. In the North East, improved energy efficiency from band G to E could increase this value by over £25,000 and the average home in the North West could see £23,000 added to its value.

Energy and Climate Change Minister Greg Barker said: “We have long known the benefits of making energy saving improvements to the home, but this study is real evidence of the huge potential rewards. Not only can energy efficient improvements help protect you against rising energy prices, but they can also add real value to your property. This Coalition is committed to helping hardworking families with the cost of living. The Green Deal is designed to do exactly that.

“The Green Deal is helping more people make these types of home improvements, reducing high upfront costs and letting people pay for some the cost through the savings on their bills. The Green Deal is a great option for anyone wanting to improve the look, feel and potentially the value of their home.”

If you're reading this as an installer, it illustrates yet another reason why so many people are turning toward renewable energy sources - especially while the Green Deal is assisting in the cost. Training in renewable energy methods is the perfect way of expanding your business as well as getting the satisfaction that you are doing your part to help decrease Britain's carbon footprint. If you would like to find out more about what renewable energy training is available to you, give Access Training a call on 0800 345 7492.

Full story: Installeronline

Installing a tap will only take you around half a day, but you will need basic plumbing skills. Under current regulations you have to fit an isolation valve and a double check valve inside your home when you put in a new outdoor tap (see below for details). If you need to know more about the regulations talk to your Water Company or local council.

1. Turn the isolation valve off if there is one on your cold water supply pipe where your new garden tap is to be connected.
   
   
2. If there's no isolation valve, turn off your main stopcock. This is fitted on the pipework and normally found either in the kitchen or where the mains water enters your house.
   
   
3. Finally if you can't find the stopcock, turn off the water authority's valve under the cover in the street or your front garden. You'll need a special long-handled spanner, available from plumbers' merchants. Once the water supply is off, open the cold tap on your sink until the water stops running and the system is drained.
   
   
4. If you're installing a new tap you need to bore a hole through your outside wall for the connecting pipework. It's easiest to make the new connection near an exposed cold water supply inside your house - near the kitchen sink, for example.
   
   
5. Position your outdoor tap at least 250mm above the damp-proof course. Then mark the screw holes where your tap will be.
   
   
6. You will need a 15mm diameter pipe to connect the tap to the cold water supply inside the house. Position the hole for this about 150mm above where you've marked the position of the tap.
   
   
7. Before drilling the hole, run the pipe through a piece of 22mm diameter copper pipe. This acts as a 'sleeve', which will prevent the pipe rubbing and water leaking out of the hole if the pipe bursts. When drilling, make sure the hole is wide enough to take the sleeve's diameter.
   
   
8. Steadily drill through the wall with a heavy-duty power drill and a large masonry bit at least 325mm long. Take out the core bit regularly to clear the loosened masonry and let the bit cool down.
   
   
9. With the supply turned off, cut through the cold water pipe directly below the exit hole you've drilled in the wall. Use a hacksaw or pipe slicer to do this and file the ends of the pipes smooth.
   
   
10. Remove enough pipe to fit a T-piece connector. Connect one end of a short piece of pipe to the T-piece. Connect the other end to an isolation valve. This allows you to cut off the water supply to the new tap if you need to in the future. Isolation valves let you turn off the water to an individual appliance without having to turn off the whole water supply. You can get two types of isolation valve: a push-fit valve, which simply pushes on to the ends of the pipes, and a compression valve.
    
    
11. Fit the valve the right way round or else it won't work correctly – there will be an arrow on the valve showing the direction of the flow of water.
    
    
12. When you've turned off the water supply, mark the section of pipe that needs removing to receive the valve. Cut the section from the pipe and be sure to file the ends smooth again.
    
    
13. Now slide a compression nut onto each piece of pipe followed by the olives. Push each end of the pipe into the fitting and tighten the compression nuts by hand.
    
    
14. Use a pair of pliers to hold the body of the valve and tighten the compression nuts about three-quarters of a turn with an adjustable spanner. When you turn on the water supply again, check for leaks. Tighten the compression nuts a little further if you have to.
    
    
15. Next you'll need another short piece of pipe to connect the isolation valve to a double check valve. Water regulations say you must fit one of these to your outside tap pipework. Double check valves stop water flowing back up a pipe the wrong way. This prevents contaminated water entering your drinking water supply.
    
    
16. For a new outside tap the double check valve must be fitted in your internal pipework, after the isolation valve. Double check valves are installed in a similar way to isolation valves.
    
    
17. After fitting the double check valve insert another short piece of pipe and an elbow. Then fit a length of pipe long enough to reach horizontally through the wall to the outside. When it's through the wall, cut the pipe to leave about 25mm protruding.
    
    
18. Finally, you'll need to cut a piece of pipe that reaches from the pipe protruding from your outside wall down to the position of your tap. These pipes will be connected using another elbow joint.
    
    
19. Connect all the parts together and tighten the joints with two adjustable spanners. You can tighten the joints more if they leak when the water supply is turned back on, but be sure not to over tighten.
    
    
20. Drill the fixing holes for the tap's wall plate, insert plugs and screw the tap plate to the wall. Screw the tap tail into the elbow joint.
    
    
21. Use plastic retaining clips for the pipes on the inside wall to stop the pipes vibrating and knocking against it. Then seal around the pipe hole in the wall with an expanding foam filler or sealant.
    
    
22. Water resistant foam pipe lagging should cover all the pipework that is on the outside of the building to protect against freezing. This will be fitted after testing for leaks.
    
    
23. Finally, turn the water supply back on and check for any leaks. Tighten joints if you need to and then you're ready to go!

- Mark Lewis

While we hope that this quick guide has helped you in installing your very own outside tap, there is only so much that can be explained online. If you would like to learn more plumbing skills, whether it be for future DIY projects or to attain the qualifications to become a professional plumber, we offer a number of intensive plumbing courses here at Access Training. If you would like to find out more, contact us on 0800 345 7492.

Until the recent changes to Part P came into force (in England only), if you carried out an electrical task in your home your only option was to notify the work to the local building control office. Building control would then get a qualified electrician to come and test your work and issue the relevant certification.

The changes in Part P now make provision for the home owner to engage a registered third-party certifier to certify that the works meet the requirements of the building regulations and BS7671 2008 (2011).

A word of warning; the third-party certification scheme has not yet started, and is not expected to be in place until later this year.

The 2013 edition of Approved Document P, which applies to England only, makes provision for notifiable electrical installation work to be certified as compliant with the Building Regulations by a ‘registered third-party certifier’. However, those interested should note that, such a service can be provided only by a ‘registered third-party certifier’, who is ‘a competent person registered with a Part P third-party certification scheme’.

Competent persons registered with schemes that authorise them to self-certify that their own work complies with the Building Regulations are not automatically entitled to certify compliance of electrical work undertaken by others. Following development by the Department for Communities and Local Government (DCLG), the arrangements for third-party certification schemes are expected to be put in place later this year.

Registration with third-party certification schemes is expected to be available to named individuals from trading companies who meet particular assessment criteria intended to ensure that those individuals are competent to inspect, test and report on the condition of electrical installation work carried out by others.

The DCLG is not expecting competent persons registered with existing Part P schemes to use third-party certification in place of self-certification. The third-party certification option is intended for DIYers and other unregistered installers who currently notify their work to local authorities.

- Mark Jenkins

The Green Deal is in danger of “sleepwalking into obscurity”, warns the ECA.

In response to the Energy and Climate Change Committee’s report into the Green Deal, the ECA has said that the findings should be a stark warning for the Government.

The ECA said, “The Energy and Climate Change Committee’s report into the Green Deal issued on 22nd May is a wake-up call to Government, which must keep on top of Green Deal performance if it is to prevent its flagship policy from sleepwalking into obscurity.”

Now the Green Deal is live, the Government must be quick to react to what is happening on the ground, and make changes if success is in doubt. Considering the PV FITs fiasco was worsened by the Department of Energy & Climate Change (DECC) relying on outdated figures on solar installations, the DECC should be accessing real-time information on the Green Deal, right now.

Millions of homes and businesses could benefit from the Green Deal, but at the current rate of assessments it will take around 100 years to get round to them. The first figures on actual Green Deal installation work, which come out in June, will be crucial.

Depending on what these figures say, the DECC may need to be ready with a Plan B. That should include reducing interest rates, which are widely seen as uncompetitive. Even simple measures like making the early adopter loans more obvious to consumers could help.

Awareness of the Green Deal financial incentives is very sketchy; publicity of what people need to do to benefit from the scheme is non-existent. How can the ‘common man’ (or woman) take advantage of the scheme when they are not being provided with any information?

The government call this a "Flagship incentive" - I would call it propaganda.

- Mark Jenkins

With the recession only just behind us and various other money troubles coming into play, it isn't surprising that the country as a whole has adopted some sort of "DIY Nation" mentality of late. And while its encouraging that more and more people are picking up tools and having a go at something they could perhaps do without the aid of a trained professional, this is something that could potentially affect the amount of work of those with the qualifications. However, a recent study has revealed that this might actually not be the case.

The study, commissioned by business insurance broker Swinton Commercial, took a sample of 100 tradesmen and women across the UK and found that in fact business is booming due to the number of botched jobs performed by budding DIYers. 20% of the plumbers who took part said that it often accounted for up to 84% of their workload! A further 25% said that they were regularly called out to fix DIY mishaps at business, while 100% of them were in agreement that over-ambitious DIYers are putting themselves and others at risk.

Some of the jobs reported included:

• A waitress in a cafe attempting to repair a commercial boiler using a bread knife and scissors while the unit was still live.
  
  
• An unsecured bath where overflows were running into the ceiling void. Lead pipes had been left and fudged into the copper pipes, with boxing made from MDF absorbing water.
  
  
• A basin tap fitted without a sealing washer, causing a large water leak, which ran through the ceiling in the hallway.

So how does this affect you? If you consider yourself a DIY enthusiast and often do this sort of work, it's vital that you know what you're doing before you start. Access Training offer a number of DIY training courses in plumbing, electric and various construction trades. These courses outline what you're capable of doing around the house on your own not just safely, but legally as well. Knowing when a job is too difficult for you is extremely important, and there's no substitute for the work of a professional tradesman when it is needed. 

Full story: http://www.hpmmag.com/newsitem.asp?newsID=2089

The Chartered Institution of Building Services Engineers (CIBSE) have recently released their first alterations to the 'TM13: Minimising the risk of Legionnaires' disease' guide in ten years. This comes following Britain experiencing its worst outbreaks of the disease to date, as well as in reaction to the advances in technology and environmental concern there are in managing water systems.

Legionella bacteria are commonly found in large sources of water such as rivers and lakes, but can very easily contaminate drinking water systems should it not be treated properly. If the bacteria are allowed to multiply and then become released into the air in water droplets, they become a serious health risk. Large buildings suchs as hotels, hospitals and office blocks, are particularly susceptible to contamination due to their more complex water supply systems.

It is aimed at primarily facility/premises managers, engineers, consultants or any other person involved in the design, installation or maintenance of building water systems. It sets to give out guidance on the appropriate design, installation, commissioning, operation and maintenance procedures necessary to minimise the risk of infection by Legionella from water systems within a building. Principles are highlighted, and practitioners in these fields are encouraged to apply them to their own particular building services applications.

This new guide also makes reference to health concerns on an international level, providing guidance on non-UK based requirements in the hope it will be a "valuable tool" in supporting compliance outside of the UK.

Speaking to HVP magazine, chairman for the new guide Greg Davies said: "The guidance has been revised and updated to reflect the legal, environmental and technological advancements we have seen over the last decade. The significant advantage of this document is it contains the level of advice needed to support those responsible for managing and maintaining water systems and services, for minimising the risks with legionella as well as how to demonstrate proactive control."

To purchase a copy of TM13, visit the CIBSE Knowledge Portal