When wanting to completely refurbish a bathroom, it can take a number of skills or tradespeople to complete the work. Firstly safely the water supply and any electrics need to be isolated, so that the de-commissioning of the bathroom suite can begin. Then the walls and ceiling can be torn down if required, with the rubble and old suite also having to be disposed of in a responsible way.
Following that any required alterations to the water supply pipes can be performed, as well as sorting out electrical wires, flooring and tacking new plasterboard walls and ceiling.
Once the finish plaster coat has been applied and dried, the bath can be made up and fixed in place. Once carpentry bits such as architrave and skirting boards can be fixed, then the tilling can take place. After this the rest of the plumbing can be completed and the electrics finalised, woodwork painted then if floor covering is going to be used it can go down (however if the floor is to be tiled this should be done before the woodwork).
So if you can organise the different trades or do all of this work yourself if you have the relative qualifications or the relative expertise of experience then managing the project yourself can save you a considerable sum of money , but it can take a considerable amount of time to organise and manage the project .
With a bathroom fitting company that can cover all trades and manage the project it might seem quite costly to begin with, but in the long run if you personally have not managed such a project then it might be advisable to employ such a company. But only after researching them through areas as “county court judgements”, “trading standards” and previous clients that have had similar work done.
- Mark Lewis
If you would like to learn more about bathroom fitting yourself, we offer a specially designed DIY Bathroom Fitting course here at Access Training. You'll learn everything you need to know including bathroom design, the fitting of covers, tap connectors, wastes, ball valves, siphons, WC seats and more. For more information about this or any of our other professional trade courses, contact us at 0800 345 7492.
Within industry I feel there is a very bad trend at the moment, many firms are trying to save money in the wrong ways. The main concern I have is with the plumbing and gas industry and their blatant disregard for Electrical safety. There any many companies that put pressure on their installers to wire the heating systems.
News flash - they are not qualified and indeed nowhere near competent to do so, unless they have received adequate training. It might save money in the short term but imagine the lawsuit when someone’s house is on fire or someone dies from an earth fault because of inadequate Earthing.
As an Electrician I’m fed up of being approached by these companies asking if I could sign off their work. Quite frankly a majority of the time their work is like that of a child and nowhere near the standards required for me or any other sane Electrician to put their name to. I have worked for many heating firms over the years and the only way to ensure safety and quality of work is to have a competent Electrician to do the wiring, in my experience one Electrician can easily wire three to five heating systems a day.
This is where I get the title “each to their own”. I am not expected to connect up a gas pipe and I would never attempt it! But Heating installers are encouraged to do Electrical work and in my eyes its madness unless they have received adequate training.
- Neil Thomas
If you need to gain the qualifications needed to wire a heating system, look no further than Access Training's range of accredited intensive electrician courses. We provide PAT Testing training, Part P courses and all the qualifications needed to become a domestic electrical installer. Contact us on 0800 345 7492 to find out more about what we can offer you and discuss exactly what you need.
Following on from part 1 we will now look at what training courses are available to you, as well as factors such as their cost and duration.
At Access Training we deliver many construction courses, including;
Each course can vary from a one week taster course to a total of eight weeks, depending on the outcome you wish to achieve. The one week taster course will give you a good insight to your chosen trade, basic use of tools and basic techniques. Then there are two and three week courses which obviously involve a more in depth look at the particular trade. Each of these courses can give you a recognised qualification from City & Guilds.
The eight week course will give you a CAA Level 2 (Construction Awards Alliance) and potentially a NVQ diploma, both of which are again highly regarded and recognised C&G qualifications. The cost of each course varies, so I suggest you contact Access Training Wales and speak to one of the course advisors.
OK you’ve finished the course you’ve gained your qualification, what next? The truth is finding work is not as difficult as you may think. Most trainees after leaving Access Training start by doing small jobs for friends, family and neighbours. This will build your confidence and give you some indication of how long a job will take. Best of all you will be under no pressure from family to complete by a certain deadline.
Then there are construction “agencies” that employ people to work on various jobs. They’ll find you the work, but be prepared to work maybe one week here, two weeks there and so on. This is a great way of gaining experience quickly and you will be on a fixed hourly rate, usually around £12 per hour.
So now that you’ve gained both experience and confidence, it’s time to go on your own. This is where you can earn a lot more money – it’s not uncommon for a good tradesperson to earn between £600-800 per week. Keep your options open, if you completed a bricklaying course don’t think that you can only lay bricks. Bricklayers can usually lay patios, decorative work indoors, build archways and more. If you completed a plastering course, plasterers can usually fix coving up, lay screed floors etc. One very lucrative area from a plastering point of view is “Venitian” or “Polished” plastering. There is a niche in the market for this type of work, if you have good trowel skills you can learn this method relatively quickly, and the price for doing this work is roughly £60 per square meter. So the choice is yours – there is work about for good tradespeople, so if you feel you need a career change then go for it!
If you need more information contact Access Training Wales on 08003457492.
- Richard James
Choosing to make a complete career change is difficult at any time of life. There are many factors to take into consideration – what opportunities are there? What training courses will I need to attend? How available is the work and how long will it last?
Take for instance many construction trades (bricklayer, carpenter, plasterer, tiler etc.). At this given time work is pretty slack in the construction industry, but I firmly believe that it won’t last much longer. So now is a good time to begin training for new skills. As soon as the construction industry opens its doors again, there will be a definite skills shortage. Having decided to take the challenge and change career what can you expect to be doing on a daily basis?
Take the plastering trade as an example, which provides plenty of opportunity to work both inside or outside. The weather in this country is not the best, so having the chance to work indoors is an added bonus; you will be working most days and won’t be losing money. Plastering covers more than just “plastering” a wall, it could be screeding a floor, plaster boarding a ceiling, dot & dab on walls, dry lining a wall, the list goes on. This is all internal work, whereas dashing, fine down, K render are all external.
Are there any transferable skills you could use, depending on your background? Plastering involves calculating quantities for mixes etc. so numeracy skills would be an advantage. A lot of questions are asked in the workplace so good communication skills would help, the ability to work unsupervised is a great asset to have, as a lot of the time you are given work and be expected to carry it out unsupervised to a high standard.
So having trained for your new career, what qualifications do you need for the construction industry? An NVQ in a relevant trade is essential; this will allow you to apply for a CSCS card – a must have to work on building sites.
Tomorrow in part 2 I will discuss what training courses are available to you, as well as their cost, duration and what you can expect to learn. Also included will be what prospects are open to you and potential wages upon completion.
- Richard James
Loft insulation is an excellent means of helping to save energy and prevent heat from escaping from our homes. With high cost of fossil fuels in today’s economic climate, and these fuels progressively running out, we shouldn’t be so frugal by putting things in the loft after the extra thickness has been added. After all, just because we might not have paid to have it installed doesn’t mean we should ignore the purpose for which it is intended for - TO SAVE US MONEY! Not only that, but to save on the resources which are only getting more expensive for energy companies to get at and transport to us. We are all guilty of storing things in the loft, and surely these items are not really needed if they’ve been put away from view?
The loft is not an ideal temperature-controlled space in our houses and we are endangering things that could be damaged by the cold and moisture that can form there. Sometimes we have to be brutal with what we are storing and just get rid of it. Let the lagging do the job it’s intended to for and financially you will benefit once your loft has been lagged to the new standards. DON’T put things up there again – your house will stay warmer for longer and you will be happier and wealthier. You also will be reducing your carbon footprint, which is vital to the planet and our descendants for the future. There are a considerable number of ways you can lower your carbon footprint, but many are still quite expensive and take a number of years to pay for themselves. Loft insulation is the cheapest form of energy conservation there is as it’s free to everyone – so why not take advantage of this?
- Mark Lewis