Despite numerous articles panning the Green Deal and various other renewable energy initiatives, it seems they've had little effect on the general public's support for environmentally-friendly alternatives.

New research by the Department of Energy and Climate Change (DECC), which surveyed over 2000 UK households back in July, has found that their strategies for implementing more renewable energy sources across the country still receive high support from the public - with 76% of respondants backing their plans.

However despite this seemingly high number there has been somewhat of a decline in interest. 18 months ago this figure stood at a slightly higher 79%, but earlier in the year it stood at a much more impressive 82%. However on the upside the number of those that oppose renewable installations hasn't changed - standing at the same 5% it did 18 months ago.

As well as recording support for large-scale energy generating methods such as wind farms and biomass, the research also found that Brits are actually quite in the know when it comes to saving money on their own personal bills with 76% having considered different ways to bring bills down. Unfortuntately, it also seems that this knowledge perhaps isn't in the right places just yet, with nearly half of respondants (47%) having never heard of smart meters. This is only 6% less than it was 18 months ago.

Smart meters are an important part of government strategy. They work by connecting homes directly to energy firms through electricity meters. This means their bills are always calculated via exact readings as opposed to estimated usage levels, which can lead to lower costs in the long run.

Towards the end of August the Electrical Safety Council revealed that DIY errors are the cause of almost half of all serious electrical shocks in UK homes.

Their survey, which took results from both electricians and consumers, found that many DIYers in fact CAN'T do it themselves and are in fact causing themselves extensive and expensive repairs that need to be done by a professional electrician. And that's if they're lucky - they're also risking both their lives and their family's lives.

These over-confident "Dive-in" DIYers are not only attempting simple jobs either, as one in five respondants without any form of electrical training said that they were confident enough to try their hand at installing new lights. One in ten even said they'd even have a go at new wiring!

So where is this added sense of bravado coming from? Well it's partly coming from relying on the advice of friends and family, who usually aren't electrically qualified themselves (over half surveyed admitted to this) but there's also another source - the internet. Two fifths said they happily turn to Google for advice, using "how-to" video guides from YouTube rather than getting proper training or calling in a professional.

But even with this factors considered, it usually comes down to the stereotypical male bravado. two fifths of men say they feel a responsibility to do electrical and DIY jobs, and almost half of all men are likely to try a job themselves or ask a mate, before seeking help from a professional.

In addition to these facts 2,000 electricians from across the country were asked about their experiences and the results were equally as alarming. 82% said repairing failed DIY efforts costs the homeowner more overall in the long run. Even worse, one third said they had seen or been involved with fixing DIY which had resulted in fires, serious electric shock or serious financial cost to repair.

Phil Buckle, Director General of the Electrical Safety Council, said: “As budgets continue to be stretched, many people will look for the easy solution but we have found this can often be more costly in the long term and can also pose severe risks. There is a lot of good advice out there on how to go about tasks safely but you must make sure the advice you take is reputable. For the small tasks that you are not sure of and for all the major jobs, my message is DDIY – Don’t Do It Yourself – get a professional in. You can find a registered electrician in your area by searching the Electrical Safety Register.”

DDIY even has some minor celebrity backing in the form of former Changing Rooms DIY expert Andy Kane (aka "Handy Andy"). He said: He said: “I’m well known for my DIY skills and love getting stuck into a good project. But when it comes to electrical DIY I always get professional advice and help. I don’t think it’s unmanly to want peace of mind for yourself and your family. Even when you are carrying out simple DIY jobs like putting up pictures, it’s important to be aware of the potential danger electricity presents in the home.”

So next time you're thinking of installing some new kitchen lights or doing a bit of rewiring, stop and think whether it's really in your ability to do that. Either swallow your pride and get a professional electrician to do the job properly, or consider getting real electrician training so you can do it yourself with REAL confidence. As well as offering training courses to those looking to become a professional electrician, Access Training can also give DIY enthusiasts the knowledge, skills and qualifications they need to do extensive home rennovating. To find out more visit our courses page or call us on 0800 345 7492.

It looks like the Gas Safe Register aren't the only ones calling for safety awareness this month.

Following (but unrelated to) yesterday's news of the Health & Safety Executive cracking down on a Bolton building firm's unsafe scaffolding, HSE inspectors have announced that they are launching a month-long safety campaign on smaller reburbishment jobs across Britain.

Unannounced inspections will take place on sites where refurbishment or repair works are underway, focusing on working at height and work which could expose builders to harmful dusts. However their inspections will also take a look at whether adequate welfare facilities such as toilets and handwashing facilities have been provided.

Heather Bryant, HSE Chief Inspector of Construction, said: “Too many people die or are seriously injured every year on Britain’s construction sites as a result of entirely avoidable incidents.

“Just as importantly, workers are unnecessarily being exposed to serious health risks, such as asbestos or silica dust, which can have fatal or debilitating consequences.

“Often we find it is smaller companies working on refurbishment and repair work who are failing to protect their workers through a lack of awareness and poor control of risks.

“This initiative provides a chance to engage with these firms to help them understand what they need to do, so they can put in place the practical measures needed to keep people safe. “However, let me be clear – if we find evidence that workers are being unnecessarily and irresponsibly put at risk we will not hesitate to take robust action. Companies who deliberately cut corners can expect to feel the full weight of the law.”

Via Construction Enquirer

Are you looking to switch careers and join the construction industry as a carpenter, bricklayer, plasterer, tiler or decorator? Not sure where you can get the qualifications to join this exciting, challenging and rewarding sector? An Access Training course could change your life. With the help of our expert teaching staff, you'll work through an intensive construction course that gets you the required qualifications to become a professional tradesman. To find out more, have a look at the courses pages on this website or contact us on 0800 345 7492.

Today The Construction Enquirer have put up a news story concerning the outcome of a Bolton building firm's court case whose scaffolding was deemed to present a risk to the crew.

The firm, R Hamer Ltd, was prosecuted after a member of the public reported the work to the Health & Safety executive. Two workers had been spotted replacing guttering during high winds on what appeared to be unsafe scaffolding, and when an inspector arrive he found the men using two "badly-erected" towers with an unsecured board being used as walkway between them. 

The court was told there was also no edge protection on the scaffolding, such as handrails or toe boards, and the workers were not using harnesses to prevent them being injured in a fall. One of the men was also seen climbing down the outside of the scaffolding rather than using an access ladder. The firm received a 12-month conditional discharge and ordered to pay £562 in prosecution costs, which is a rather leniant sentence for something that could have endangered lives.

This news story reminded me of a tweet I had seen earlier last week from @DIYDoctor, which I've shared below:

Falling from heights is one of the biggest causes of workplace death in the construction industry, and can easily be avoided by using safe and secure scaffolding. If you see a construction firm not taking the right precautions, you should report them to the HSE before an accident can happen. Likewise if you're doing a bit of exterior DIY don't think you can just get away with precariously balancing on the roof and a carefully laid out piece of wood like the man above. Otherwise that little job could end up costing you your life.

Via HVP Mag

New research from Screwfix has found that British trademen are working longer hourse than ever, even going as far as sacrificing holidays and weekends, in order to squeeze in more jobs.

It found that tradesmen work on averafe between 41 and 50 hours a week, which is more than bankers, medical practitioners and barristers/judges (who clocked in at 40.9, 38.4 and 36 hours respectively). A fifth of tradesmen admitted to working more than 50 hours a week - well about the UK average of 36.4 hours!

Not only that, but they are also not taking the annual statutory entitlement of 28 days, with one in six only taking fewer than 10 days off each year. Only 1% take more than an hour's lunch break, with three quarters of those surveyed happy to skip it altogether.

John Mewett, marketing director for Screwfix, said: “We know how hard tradesmen work, but the research really brought home how many hours they are putting in each week and how stretched they really are.

“For a lot of tradesmen, time is money, and so any opportunity to squeeze in an extra job is snatched up. This can mean long working hours and driving further from home to increase their workload. However, by finding ways to work more effectively, they can cut their working hours.”

The full infographic from Screwfix also included these interesting tidbits on tradesman habits:

• 87% are driving the same amount or more this year
• 62% eat a packed lunch each day
• Tea is the most popular drink of choice, winning with 57% of the vote
• 8 out of 10 skip meals while working
• Average lunch break for tradesmen is 10 – 20 minutes
• 73% think they don’t take enough exercise
• 17% walk to work
• 83% are working the same hours or more this year

Last month not-for profit training charity JTL launched a new initiative aimed at encouraging more women into trade (particularly electric and plumbing) apprenticeships. Its launch was marked by a parliamentary reception and is back by a number of MPs, including Labour Party leader Ed Miliband.

Currently, women make up just 2% of apprentices in the construction sector, and around 1% of apprentices within the electrotechnical industry. To help try and raise these numbers, JTL have appointed 10 inaugural apprentice ambassadors (all of which are former JTL apprentices) - chosen for their personal success and passion when it comes to promoting apprenticeships. These people will then travel across England and Wales, speaking at schools and local events in an attempt to encourage more young women to sign up. The apprentice ambassadors will also act as mentors to any girl who signs up for a JTL apprenticeship, with the charity also hoping to appoint more ambassadors next year as the scheme grows.

JTL chairman Dr Ian Livsey said: “We wanted to bring the ambassadors to Westminster to highlight the issues which prevent women from entering these apprenticeships. We have helped more than 40,000 apprentices train over the last 24 years, but only a small percentage have been female. This has been because women don’t see building services as something that they can do. This perception is something we need to change. Hopefully, by hearing the stories from the ambassadors and by seeing that employers are willing to support female apprentices, more young women will want to take up apprenticeships in the electrical, plumbing and heating and ventilating sectors, and make that first step to a skilled career.”

Now in their 23rd year, JTL was originally established by the Electrical Contractors Association and Unite the Union to manage training in the electrical sector. The company works with more than 120 colleges/private training centres, to which they sub-contract the knowledge syllabus elements of the NVQ Diploma.

Need to complete a plastering DIY job but have absolutely no idea where to start? Considering a career change to plastering but lack the expertise to make it happen? Fear not, Access Training is on hand to help prepare you for whatever it is that lies ahead. Like with all trades, the first step is to take a look at exactly what it is and understand some of the terms and definitions you'll come across. To assist with this, we've put together a brief list of some of the common plastering definitions to get you started;

Accelerator: A material that shortens the setting time of plasters and other cement-like materials.

Admixture: Any substance added to a plaster component or plaster mortar for the purpose of modifying its properties.

Aggregate: Granular material that does not contribute to the hardening reaction of the mortar.

Bonding Mortar: A mortar to produce a first bonding coat in a multicoat system. Usually applied in a thin coat.

Correction Time: The maximum time interval during which adjustment is possible without significant loss of final strength. This may be also referred to as adjustability.

Dot and Dab: A technique used to attach plasterboard to walls using small lumps of adhesive.

Float: A tool or procedure used to straighten and level the finish coat, to correct surface irregularities prodDouced by other tools, or to bestow a distinctive surface texture.

Grout:  A mortar or paste for filling crevices, esp. the gaps between wall or floor tiles

Hawk: A tool used by plasterers to hold and carry plaster.

Mortar: A plastic mixture composed of water and a cementitious material, which may be machine or hand applied, and which hardens in place.

Screed: To level or straighten a plaster coat application with a rod, darby or other similar tool

Setting Time: The time after which the mortar begins to harden. After this time the mortar is normally stable in the presence of water.

Substrate: Immediate surface to which the mortar is to be applied. In the case of a coating to be applied to an existing render, the render would be the coating's substrate.

Unsound: This refers to the condition of plaster where the hardened mass has lost internal strength, exhibiting cracking/spalling/delamination/etc. This general state may be contributed to by excessive aggregate addition, water damage, poor drying conditions, overwatering and other factors.

Now that you know some of the definitions you may come across when plastering, its time to have a go at the real thing. However attempting a job without proper training could not only prove expensive, but you might end up doing lasting damage to the wall or surface you're working on. To get the most rounded plastering experience the best option is a comprehensive plastering course from Access Training. With a variety of different courses for different skill levels, our experienced teaching staff will either fully prepare you for future DIY work or help you attain the vital qualifications needed to gain employment as a professional plasterer. With our courses open to people of all ages and backgrounds, you could just be a phonecall away from gaining a valuable new skill that will stay with you for the rest of your life. To find out more please take a look at our courses page or call us on 0800 345 7492.

To round of the week we turn to capentry for our quick definition guide. Hopefully this post will give you a beginner understanding of some of the more basic terms carpenters use, and you'll be able to use them to build up your own DIY knowledge or even as the first step in becoming a professional carpnenter!

Architrave: The ornamental mouldings fitted around a door or window frame. These also cover the joint between the plaster and wood framing.

Auger: A long drill-bit-like tool turned with the hands, usually by means of a handle.

Bead: A rounded shape cut into a square edge to soften the edge and provide some protection against splitting. When several beads are placed together, they are called Reeds. If the bead lies below the surface, it is referred to as a Sunk Bead.

Bench Hook: A workbench accessory used to provide a stop against a piece of wood being worked can be placed to hold it steady whilst cutting, planing, or chiseling that piece of wood.

Brace: A part of a timber or metal structure spanning a diagonal space that adds strength and stability, and resists compression or tension.

Dado: Decorative panelling applied to the lower part of an internal wall.

Dado Rail: Decorative moulding applied to an internal wall at a height of around 1m. 

Dowel: A short length of wood, round in section, used for a variety of purposes such as joining timbers, plugging fixing holes etc.

Eaves: The bottom edge of a roof that meets the walls of the structure. This is also where the water is collected into the gutter.

Fibreboard: A lightweight and weak manufactured board often used when making cheaper furniture.

Grain: The appearance, size and direction of the fibres of the timber.

Hardboard: Manufactured board made with compressed particles of wood formed together. One side of the board smooth with the other side rough. Hardboard in sheet form is often used and subfloor covering to give a smooth and flat surface.

Joists: Lengths of timbers that support ceilings and floors, usually fixed in parallel.

Mitre: A 45 degree angle joint that neatly joins two pieces of timber together.

Stud wall: A timber framed internal wall faced with plasterboard that is non-load bearing.

While this should be enough to get you started on the theory side of things, the next step is to find the correct carpentry training that can offer you exactly what you need. You might want to gain qualifications and seek employment as a professional carpenter, or alternatively you could simply be looking tp build up your DIY skill set properly. Access Training offer a range of carpentry courses to suit both parties, and are available to everyone no matter their background or skill level. To find out more about what we can give you, take a look at our courses page or give our team a call on 0800 345 7492.

Continuing our series of glossaries to help getting budding tradesmen and DIY enthusiasts on their way, we next turn to the world of tiling. Can't tell a grout from an adhesive? The term "base row" got you confused? Here's a list of some of the most common tiling definitions to help get you started;

Base row: This is your first row of tiles. Laying this is an important stage of tiling, as this provides the foundations for the rest of the tiles. These tiles must be straight, so be sure to use a spirit level.

Bond:  The adherence of one material to another. Effective bonds must be achieved between the scratch coat and mortar, between the mortar and tile, and between the backing and adhesive.

Border Tile: Borders add colour, pattern and texture to a tiling scheme and are available in porcelain, ceramic, glass and natural stone.

Fixing Time:  The length of time, after applying an adhesive, that the tiles can be fixed.

Grout: A cement-like setting mix used for filling in the gaps between tiles once the adhesive has set. It is available in a range of different colours.

Grout sealant/sealer: Most grouts are porous, meaning they absorb water over time which can cause problems with mould, damp and dirt. To prevent this, a grout sealant is applied over the grout once it has set.

Mounted Tile:  Tiles that have been assembled into sheets or units onto suitable material to facilitate handling and installation. They may be back-mounted, face-mounted or edge-mounted.

Set Time:  The time, usually in hours, after which a bonded tile can be grouted and/or walked upon without affecting the bond. The set time for ready mixed adhesives varies greatly depending on the materials used.

Spacers: Cross-shaped plastic pieces that are used to ensure an equal gap between tiles when laying them.

Tanking:  Applying a liquid waterproof membrane, usually incorporating a mesh, in areas such as showers to protect moisture sensitive background substrates from water impregnation.

Tile Adhesive: A special type of glue used for bonding tiles to a surface. There are different varieties available depending on the area to be tiled, such as standard, waterproof and heatproof adhesives. Standard adhesive should only be used if the area you are tiling will not come into contact with water.

However knowing these definitions is only going to help you so much. To be able to tile kitchens, bathrooms and more to a professional standard, what you'll need is an intensive tiling training course. Access Training offer a number of tiling courses that will not only provide DIYers with the skills they need for their latest home rennovation project, but also the qualifications trainee tilers need for a long and rewarding career in the tiling industry. For more information visit our courses page or contact us on 0800 345 7492 to book your place today!