The last few days have been a reminder that winter is well and truly here, with the temperature dropping and the country getting its first innings of both frost and snow. Even with energy bills on the rise, it's important to keep warm during this time of the year and make sure that your heating system is working properly. According to Government statistics, the 2012-13 winter period saw the largest excess mortality rate since 2008-09, with deaths coinciding with influenza, RSV and the cold weather.

The run-up to Christmas can be a busy time for plumbers and gas engineers, with consumers coming with all kinds of problems including broken down boilers and frozen pipes. For the tradespeople reading this it'll be good for business, but for the rest of us here is a few pieces of advice to keep away any unwanted costs as well as making sure your home stays warm.

The UK had a pretty good summer this year so it's likely that you haven't turned the heating on for a while, so it'll be good practice to check it regularly to make sure it's all in working order. Suddenly starting it up in a cold snap could result in it freezing up and potentially breaking down. Regular boiler checks by a professional plumber and gas engineer are important and should be done once a year, including servicing according to the manufacturer's instructions. Not doing so not only puts you at risk of forking out for repair costs, but in the case of gas boilers also puts you and your family at risk of possible carbon monoxide poisoning.

Another handy tip is to bleed your radiators. If you can feel cold patches on them it may be due to some air trapped inside that's blocking the system. It's easy to do and won't require the help of a plumber, but should that fail it might be blocked with something else. In this case the radiator might need a chemical flush and you will require a Gas Safe engineer to get the job done.

Most importantly, and this really goes for any sort of DIY maintenance work - KNOW YOUR LIMITS! If there's something you know that you can't do, don't try and do a botched job of it anyway as you'll end up having to pay even more to get it repaired properly.

----

With plumbers and gas engineers needed more than ever during these winter months, now if the perfect time to qualify as a plumber and/or gas engineer with an intensive Access Training course. We not only offer comprehensive training for beginners, but also ACS reassessment to those needing to give their qualifications an update. To find out more contact one of our course advisers on 0800 345 7492.

Those that have completed their gas training and gone on to become a fully qualified gas engineer can now save even more money thanks to CORGI's VAT Saver.

According to their website CORGI VAT Saver works on an extremely complicated algorithm that allows you to calculate your VAT taking into account the 'energy saving' element of the job being subject to the lower VAT rate. All you need to do is enter the details and they handle the rest. 

Now, to bring the scheme in line with new legislation they are offering even more savings - an additional £142 for every boiler you install. What you choose to do with this is entirely up to you - you can keep it yourself or alternatively pass it on to your customer to ensure even more business in the future.

Corgi VAT Saver registration is absolutely free and can be used by any Gas Safe registered engineer (you will need your ID number when signing up). All you need to use it then is access to the internet, so it'll be available to you at home, in the office, out on a job and anywhere else you may need it. You can register online or call them at 0800 612 8490.

----

Before you can take advantage of such a great offer, you'll need to be a member of the Gas Safe Register - something you won't achieve without the proper training. Here at Access Training you can gain the skills to become a fully-qualified gas engineer in our state-of-the-art centre. Work alongside like-minded students and experienced teaching staff to kickstart the next stage in your working life. To find out more call our team on 0800 345 7492.

 

Easy Safety Cert are offering registered Gas Safe engineers a free trial of their gas safety inspection software, available as an app for iOS devices such as an iPad or iPhone, with an Android version due to launch within the next six weeks.

Engineers will be able to complete, send and store gas safety inspections while on the go. They will also be access their own secure online database, which stores completed certificates along with client and job details and automatically sets 12-month inspection reminders.

The trial allows three free inspections; beyond that, engineers can purchase inspections on a pay-as-you-go basis. There are no subscription fees or extra charges for multiple users, devices, support or updates.

Bianca Dainty, director of Easy Safety Cert, said: "We’ve always had a key focus on usability and quality. The new features found in the iPad and updated iPhone apps are examples of our commitment to bringing the best technology to our customers."

The app can be found by searching "ESC GasCert" in the App store.

Just over a month after the announcement that the start of the Renewable Heat Incentive would be delayed until Spring 2014, the UK Government has also delayed the introduction of proposed "smart meters" to 30 million homes until Autumn 2015.

The £11.7 billion project has been considered vital to getting householders to cut their energy use as the country faces having to import more energy in the future. These smart meters record consumption of gas and electricity in hourly intervals, regularly communicating the information back to the utility provider for monitoring and billing purposes. While the project is set to start in 2015, its estimated that the move to install these into every home won't be completed until 2020.

Angela Knight, chief executive of Energy UK, noted that installing these meters is going to be a "complex task" and this delay will allow the changeover to happen more efficiently. She said: "We welcome the government's prudent decision to allow an additional 12 months to complete the smart meter programme. This recognises the scale of the programme and the need to prepare carefully."

Energy Secretary Ed Davey added: "Completing the national rollout will be an enormous logistical and technical challenge for the industry. Getting this right for consumers is the government's priority."

However the Government will be taking measures to speed up the introduction despite delays. From the end of 2013, when a customer switches from a supplier who has provided them with a smart meter, the new supplier has to either rent the previous supplier’s meter or install their own smart meter, helping to gradually phase out old equipment. This also makes sure that suppliers don’t lose out when they become early adopters. There are also proposals to require energy suppliers and network operators to comply with the Smart Energy Code and ensure their smart meters really perform their advanced functions and supply data to customers.

Further reading: http://www.bbc.co.uk/news/business-22480068

http://www.techweekeurope.co.uk/news/smart-meter-roll-out-delayed-until-autumn-2015-116011

http://www.ft.com/cms/s/0/70d66e86-b97b-11e2-bc57-00144feabdc0.html#axzz2TFaAEogR

While there will always be a demand for qualified tradesmen such as electricians, plumbers and gas engineers, setting yourself apart from the other tradesmen in your local area is an important factor is getting your name out there among potential clients. And the best way to do this is to consider qualifying in more than one skill. Commonly gas engineer training goes hand in hand with plumbing qualifications, but there are far more potential combinations that could benefit your future career.

For example, if a plumber were to undertake electrical training it would open up a variety of new work for them that they wouldn’t be able to complete otherwise without a second tradesman. They would be able to properly install power showers, and by achieving a Part P qualification would also be permitted to sign off the work themselves once they had joined a relevant Competent Person Scheme.

In turn, if an electrician had plastering qualifications, they could provide a fresh finish to a wall surface after tearing it apart to complete an installation. The same applies for combining plastering, tiling and/or carpentry courses. You’ll be increasing both your eternal potential and boost your chance of success when starting up your own business.

Take note though, it’s vital that you train properly for your second skill just as you did the first. A plumber should not be attempting any electrical work without the proper electrical qualifications and the same goes for any other potential trades. Not only would you be putting yourself at risk, but your customer as well. By training properly, you’ll be able to do the job properly and known as a tradesman capable and competent enough to get the job done on their own.

If you would like to find out more about the multi-skills training routes available to you, give Access Training a call on 0800 345 7492 and our team will be happy to tell you more.

Within industry I feel there is a very bad trend at the moment, many firms are trying to save money in the wrong ways. The main concern I have is with the plumbing and gas industry and their blatant disregard for Electrical safety. There any many companies that put pressure on their installers to wire the heating systems.

News flash - they are not qualified and indeed nowhere near competent to do so, unless they have received adequate training. It might save money in the short term but imagine the lawsuit when someone’s house is on fire or someone dies from an earth fault because of inadequate Earthing.

As an Electrician I’m fed up of being approached by these companies asking if I could sign off their work. Quite frankly a majority of the time their work is like that of a child and nowhere near the standards required for me or any other sane Electrician to put their name to. I have worked for many heating firms over the years and the only way to ensure safety and quality of work is to have a competent Electrician to do the wiring, in my experience one Electrician can easily wire three to five heating systems a day.

This is where I get the title “each to their own”. I am not expected to connect up a gas pipe and I would never attempt it! But Heating installers are encouraged to do Electrical work and in my eyes its madness unless they have received adequate training.

- Neil Thomas

If you need to gain the qualifications needed to wire a heating system, look no further than Access Training's range of accredited intensive electrician courses. We provide PAT Testing training, Part P courses and all the qualifications needed to become a domestic electrical installer. Contact us on 0800 345 7492 to find out more about what we can offer you and discuss exactly what you need.

Get in touch to learn more about our training courses!

First Name *
Surname *
Telephone Number *
E-mail address *
Ask A Question *
 
Security Character Security Character Security Character Security Character Security Character Security Character
Enter Letters (No Spaces) *