A gas engineer in St Columb will be sentenced after carrying out dozens of jobs in people’s homes without the relevant qualifications.

Darren Masters had apparently serviced and installed boilers, as well as fitting gas hobs and gas fires, leaving numerous homes in danger.

 

gavel, gas safety, gas news

 

Rogue Trader Full of Hot Air

The 33-year-old pleaded guilty to 11 charges of breaching safety regulations, carrying out the work without being on the Gas Safety Register.

Despite not being a registered gas engineer, Mr Masters falsely claimed to be a fully-fledged member of the Gas Safety Register in order to secure work.

After pleading guilty at the Truro Magistrates’ Court on December 16th, the case was adjourned to the seriousness of the crime and sent to the Truro Crown Court for sentencing in the New Year.

 

Dangers of Poorly Fitted Gas Fixtures

Gas fittings and fixtures that have been improperly installed carry with them a wide variety of potentially life-threatening hazards.

A faulty installation can release poisonous carbon monoxide which can be fatal, as a result. Meanwhile, a gas leak can also lead to significant fire hazards and even cause an explosion.

 

Gas Training Courses at Access Training UK

The incident once again highlights how vital appropriate training really is when it comes to gas safety. By-passing such qualifications can have serious consequences on both the fitter and the customer, with potentially devastating results all-round.

If you are thinking of exploring a career as a gas engineer, Access Training UK can help you do it right. We have a variety of gas courses available to ensure you enter the trade fully capable of carrying out gas work safely, efficiently and correctly.

Check out our relevant courses below to find out what we can offer you in terms of gas training options:

 

For more information on the gas training courses available at Access Training UK, why not drop us a line today? Call now on 0800 345 7492 or get in touch online by clicking the button below.

Get in Touch

An unregistered gas engineer has found himself in serious trouble after fitting a gas boiler without the relevant safety authorisation to do so. 

gas news, gas training courses

 

Boiling Point

Self-employed electrician, Robert Parker, from Burnley had carried out gas work throughout the spring and summer of 2017; however, it was his work on a boiler in October that brought his alarming practice to the attention of authorities.

Following a gas boiler installation at a home in Rossendale, the occupiers noticed installation defects which became a cause for concern. Gas Safe inspectors investigated the issue and not only found the work to be below current standards but also deemed the boiler to be “immediately dangerous”.

 

Gas Safe Register

The Gas Safe Register is the official list of gas engineers who are qualified to legally work on gas appliances. Anyone employed to work on gas appliances in domestic premises is required by law to be on the Gas Safe Register.

Unfortunately for Mr Parker, his name was not on the list of officially authorised engineers cleared to work with gas. As a result of such a dangerous oversight, the Burnley man paid a hefty price for his gross negligence.

 

Breaching Regulations

The case ultimately made its way to Manchester magistrates court, where the court heard the details of the incident. Mr Parker went on to plead guilty to breaching Regulation 3(1) of the Gas Safety (Installation and Use) Regulations 1998.

As a result of the hearing, the electrician was given a 26-week suspended prison sentence, 150 hours community service and levied with a charge of just under £2300.

 

Gas Training Courses at Access Training UK

The case of Mr Parker not only highlights the importance of being fully competent on the job but also reinforces the importance of safety when dealing with gas. Ignorance in this field could lead to devastating consequences that could very well prove fatal.

At Access Training UK, we offer a number of gas courses that are specifically designed to provide you with the educationary tools and necessary know-how needed to complete gas work effectively, efficiently and, most importantly, safely.

Check out our relevant courses below to find out what we can offer you in terms of gas training options:

Essential Gas Course

Ideal for beginners, the Essential Gas Course is a great introduction to the fundamentals of safe, efficient gas work.

Professional Gas Course

With no prior experience required, this course is perfect for those looking to make a career as a gas engineer.

Premier Gas Course 

Combining the basics of electrical work with comprehensive gas training, this bespoke programme covers everything you need to know about gas/electrical work.

ACS Initial Assessment

Completing the ACS assessment will provide you with a CCN1 qualification and allow you to join the Gas Safe Register.

ACS Reassessment

ACS certificates require periodical renewal to retain Gas Safe status. Get your reassessment here at Access Training UK.

LPG – Liquid Petroleum Gas Training

Our intensive course is designed to help experienced natural gas workers make the transition to working with LPG (Liquid Petroleum Gas).

 

For more information on the gas training courses available at Access Training UK, why not drop us a line today? Call now on 0800 345 7492 or get in touch online by clicking the button below.

Get in Touch

How Safe Is Your House? is a new programme from the BBC that looks at all the different accidents that can befall homeowners. Not only does it feature experts uncovering home dangers that you might not know about, it also goes undercover to expose rogue tradespeople and the shoddy work they perform while pretending to be fully qualified. The second episode in the series aired last night on BBC 1, and included was something very important to us here at Access Training - proper gas engineer training and the Gas Safe Register.

It is estimated that there are currently around 7500 unqualified gas engineers working illegally in the UK, installing up a quarter of a million (250,000) appliances in our homes. All engineers should be part of the Gas Safe Register to work legally on any sort of gas appliance, and without that not only are they working illegally but you have no way of knowing how qualified these engineers really are. One simple registration may not be enough either - engineers must have separate qualifications for EACH gas appliance they work on. So if an engineer is Gas Safe Registered to work on boilers, that doesn't necessarily mean he has the qualifications to work on fires. The information as to exactly what your hired engineer is qualified in can be found on the back of their Gas Safe ID card, which you can ask to see at any time.

Operating as a gas engineer without first joining the register can not only result in fines/imprisonment, but it also endangers the lives of the homeowners who are placing their trust in you. A quick phone call is all it can take for a doubtful homeowner to double check whether their engineer is registered, and Gas Safe also provide these records online. With it so easy to be caught out, is it really worth endangering the lives of others and risking facing the law?

Andrew Barnes seemed to think so, as he was prosecuted by the Health & Safety Executive for not being Gas Safe Registered, fined and given a conditional discharge. Two months later, he was at it again without getting registered. How Safe is Your House went undercover to expose him, eventually confronting him when he continued to claim he was legally registered to work on gas appliances. It was only after this confrontation that he finally registered, but who knows what could have happened in the time he was practicing illegally.

The whole episode is well worth the watch, and can be found on BBC iPlayer for the next 6 days.

If you're training to become a gas engineer or considering a change of career to become a gas engineer, it is vital that you earn the correct qualifications and then become Gas Safe Registered. Here at Access Training we'll be able to help you with this, as we offer intensive gas training courses complete with a work placemebt and ACS assessment. You'll learn the basics from experienced gas engineers before moving on to completing a top quality portfolio working alongside an established engineer. Then you'll return to our centre ready to tackle the ACS assessments, fully qualifying you for Gas Safe Registration.

Having the right qualifications isn't just a matter of being the best you can, it's a legal obligation. Don't risk the lives of your customers, give us a call on 0800 345 7492 and get the correct training.

Charlie Mullins, head of arguably Britain's biggest plumbing firm - Plimco Plumbers, has taken a stand to highlight a serious loophole in current gas regulations. 

While it is common knowledge that gas engineers need to become Gas Safe registered once qualified in order to legally install and maintain gas appliances, the same does not apply when it comes to the purchasing of boilers and other gas-related equipment. Although some builders' merchants will check their customers registration before letting them buy such things, an increase in internet-based suppliers is making this something harder and harder to police.

Because of this, rogue engineers can find it far easier to trick customers into believing that they are Gas Safe registered. Not only them, but also unqualified indviduals such as homeowners who may not know the rules and believe they could have a go at it themselves. Should a mistake be made by either of these parties, the results can be fatal and potentially cost people their lives.

Therefor Mr Mullins believes that the Health & Safety Executive (HSE) needs to clamp down on this huge flaw in the system, extending its regulation of the gas market to the purchase of equipment - something that can only be done by altering the law.

The Plimco Plumbers CEO considers it "ludicrous" that buying boilers/gas equipment is as simple as walking into a shop or clicking your mouse. He added that gas "in the wrong hands is a lethal weapon and used incorrectly people will end up dead".

He went on to talk about how once a "cowboy gas fitter or over enthusiastic amatuer" is in possession of these things, the law is powerless to save lives despite it being illegal for them to install it. Certainly prosecutions can follow should that person be found out, but in most of these cases prosecutions only happen after a life-taking tragedy has already happened.

Charlie suggests:"The truth of the matter is there’s only one opportunity to protect people from this dangerous legal anomaly and that’s to make it illegal to buy gas equipment without a Gas Safe ticket. We have built ourselves a pretty decent safety system to protect people from monoxide poisoning, so why do we insist on retaining a great big hole in the net? The law needs to be changed because this is something that will save lives."

What are your thoughts on the matter? Certainly the thought of non-qualified people being able to go into their local branch of B&Q and purchase gas equipment should be alarming to all the Gas Safe registered installers out there, after all the training you have gone through to get where you are today. To become a fully qualified gas engineer, candidates need to go through a rigorous training course - at the end of which they will be able to build up their gas portfolio and pass the required ACS assessments. Only then will you be able to join the Gas Safe register and be legally permitted to work on gas installations and appliances.

To find out more about what it takes to become a Gas Safe engineer and Access Training's range of intensive gas courses, give us a call on 0800 345 7492.

When it comes to gas fitting, there is nothing more important than safety. Not taking the right precautions can cost people their lives, and installers found guilty of negligence could face manslaughter charges and prison sentences. For an example of just how dangerous gas can be when not properly handled, cast your eyes on the story below.

Two houses were completely destroyed with others damaged yesterday when a gas explosion of currently unknown origin occurred in Clacton, Essex. Thankfully no one was killed in the blast but 10 were injured, with two - a man in his 70s and a woman in her 50s, badly burnt but now in "stable" condition.

Taking place around 8:30am yesterday morning, a total of 10 properties in the street (Cloes Lane) needed to be evacuated along with a further nine in the road behind. Victims were needed to be pulled from the rubble as houses were flattened, with debris blowing across to hit those nearby.

The Health and Safety Executive (HSE), National Grid and Essex Police/Fire Services will now carry out a full investigation into what caused such a destructive blast. A spokesperson for the National Grid has already said that it did not appear as though there were any faults in the pipes leading up to the three badly damaged houses, however more thorough tests would be carried out once demolition work has been completed. There had also been no mains replacement work done in that area recently, further adding to the mystery of what could have caused it.

Houses were cornered off as a reception centre was set up for those evacuated from their homes. A Facebook group has also been set up to offer support and donations to those who have lost their homes. Access Training wish everyone involved in the disaster a swift recovery and hope that they will be able to return to normality soon.

This is the kind of damage gas negligence can cause. ANYONE dealing with gas pipes at any level should be fully qualified, having undergone the correct gas training course, complete their ACS assessment and joined the Gas Safety register. This is a legal requirement of ALL gas installers and non-compliance is not tolerated. The life of a gas installer can be a challenging, exciting and prosperous one, also one that requires focus, dedication and conscienciousness. Would you want to be the cause of something like this?

Story via BBC News

2014 is already shaping up to be a big year for Access Training Academies, and today (the 13th January) marks the first steps we'll be taking to make your training experience here even better. This year ACS gas assessments will be returning to our Cardiff training centre.

Now students that complete their gas training at Access will be able to complete their Logic ACS (Accredited Certification Scheme) gas assessments here. ACS is the industry recognised and accepted route for students to enter into the gas industry, earning their gas certificate which is needed to become a member of the Gas Safe Register. This itself is a legal requirement to be able to work on all gas installations and appliances in the UK. These assessments will not only be available to those who have completed an extensive gas course here, but is also open to others who may have completed a gas course elsewhere.

Students will be able to complete both the written and practical assessments required to qualify, covering the CCN1 Core Domestic Gas Safety module and then any of the additional appliance assessments relevant to your area of work. This includes the CENWAT (Central Heating Boilers & Water Heaters) qualification, CKR1 (Cookers), HTR1 (Gas Fires) and more. For a full list of what we can offer you here at Access, please get in contact.

To find out more about ACS gas assessments, our plumbing training or any of the many other trades training courses we provide here at Access please get in contact with our course advice team on 0800 345 7492 or via the form provided on this website. They'll be more than happy to answer any further questions you might have, as well as arrange of a tour of our facilities so you can get a first-hand look at what we do.

With the planned building of millions of new homes across the UK well underway, many are also expecting a rise in new buyers over the next few years as Britain enjoys a well-needed construction boom. 

With this in mind, OFTEC - the group responsible for maintaining standards across the domestic oil heating and cooking industry, is offering some practical advice to those first-time buyers who may soon begin their search for the perfect home. This advice isn't just aimed at buyers of brand new homes either - it's especially geared toward those who may take on an existing home and not know what to look for in terms of their heating/hot water systems. Heating problems may be difficult to spot with the naked eye, especially to someone who hasn't done a plumbing training course or extensive gas training, but OFTEC offer these handy bits of advice to make sure you can walk into your new home with both buyer's satisfaction and peace of mind.

Be sure to check the boiler

Has it has had any problems in the past? When was the last time it was serviced? Boilers should be serviced annually for a number of reasons, mainly to make sure that is running efficiently and more importantly safely. If you are really unsure, it might be worth asking the current homeowner if you can have it looked at beforehand by a professional gas engineer.

Check the Energy Performance Certificate (EPC)

These give potential buyers valuable information about the property's typical energy usage and costs. An EPC grades the property’s energy efficiency from A to G and contains two particularly important areas - current features and recommendations for improving the home. The current features section lists the most significant energy-related features of the property and gives them a star rating based on cost. The recommendations give more information about each energy efficiency measure recommended and explains in general terms how it would improve the energy efficiency of the home.

How much do you know about the hot water system?

How is it heated? It might be worth checking the water pressure to make sure it is all up to scratch.

Know the warning signs

Occurances such as stained/smoke damaged areas around the boiler and flue are not to be ignored and should be treated VERY seriously. If any properties you view have these, make sure that a registered gas safe engineer doesn't just look at them for your safety - but also for the safety of the current homeowners. Other telltale signs of bad maintenance include leaks and staining on carpets near radiators.

Getting the house properly checked

OFTEC recommend getting valuations, an RICS homebuyer’s report or even a full structural survey. The valuation carried out by a mortgage company is not a survey, and will not inform you if there are any defects that materially affect the property’s value.

 

However the most important thing OFTEC recommend is trusting your instinct. if you think there is something wrong with the property, then don't just discard those feelings. However if you get a good feeling this may be the house for you - minor problems can easily fixed by competent tradespeople, but be sure to make sure the costs aren't racking up before you've even moved in!

Via InstallerOnline

Despite the advances in electric fires and other forms of household heating, gas fires are still proving to be the number one choice for homes. So if you're looking to go out and get your gas certificate to become a qualified engineer, you'll be pleased to know that business is just as good as ever.

As well as the authenticity and flame effect which prove highly popular among the public, gas is still the cheapest fuel to run. On average, 1kW of gas supplied by British Gas costs just 4.662p (incl VAT) compared to nearly 14.259p (incl VAT) for 1kW of electricity - a number that seems to only be going up these days. Not only that, running a gas fire is actually more beneficial to the environment too, as it delivers half the CO2 emissions of an electric fire.

Gas fires are also far more efficient than they were back in the 80s, with developments in technology making them capable of delivering heat efficiencies of over 80% and heat outputs of 4.0kW - more than enough to heat your living room! But most of all a gas fire is reliable - if by chance your boiler were to break down over the winter (say, due to condensation freeze), you'll still be able to keep safe and warm until everything is back up and running.

Gas heating is just as vital now as it was 20 years ago, and Britain will continue to need engineers who have received the proper gas training. At Access Training you'll be able to learn all about the gas trade on one of our intensive training courses, eventually going on to complete a guaranteed work placement and subsequent ACS assessments. After that you'll be able to join the Gas Safe register and legally work on all forms of gas installation and appliance in the UK. Reckless gas maintenance can cost people their lives, so we're sure to make sure ALL of our students are training to the required professional standard.

To find out more give Access Training a call on 0800 345 7492.

New figures from the Gas Safe Register have warned that around 900,000 homes could be at risk from a gas explosion, fire or leak resulting in carbon monoxide poisoning.

The UK's official gas safety authority has been inspecting nearly 43,000 homes nationally since January last year, and found that more than one in five (22%) privately rented homes were at risk. The 900,000 figure is an estimate of when all 4.1 million privately let homes are taken into account. This figure was noticeably higher than homes privately owned or rented through a local authority/housing association, which were at 16% and 12% respectively.

As per the Gas Safety (Installation and Use) Regulations 1998, landlords are legally required to ensure that all gas appliances and flues at safe in the properties they let. This involves arranging annual safety checks from a registered gas engineer. The legal requirement doesn't stretch to homeowners, but is also highly recommended by experts. A registered gas engineer is one who will have completed all the relevant gas training and gained the necessary qualifications, and then joined the Gas Safe Register - something which is also a legal requirement for gas engineers.

To combat this alarming figure, the Gas Safe Register is urging tenants and landlords alike to sign up to a free annual gas safety service reminder at StayGasSafe.co.uk, where users will receive an email telling them when their appliances are due for a check. In addition to these checks, landlords are also responsible for any repair work required to appliances or pipework. Should they not fulfil these obligations then they face prosecution, resulting in fines or even imprisonment in extreme cases.

Sarah Hill, Stakeholder Relations manager for Gas Safe Register, said: "Signing up for an annual gas safety reminder can help landlords stay on the right side of the law and most importantly, keep their tenants safe."

...

Are you an existing gas engineer in need of renewing your qualifications? Or alternatively a beginner looking to start a new career in the gas trade? Joining the Gas Safe Register is a legal requirement of all engineers, and this can only be done after earning the proper qualifications. Access Training Academies' instensive gas course will provide you with all the training you require, including a guaranteed work placement where you will be able to gather evidence of your work for the required gas portfolio. To find out more about the course and book your place, please call us on 0800 345 7492

Get in touch to learn more about our training courses!

First Name *
Surname *
Telephone Number *
E-mail address *
Ask A Question *
 
Security Character Security Character Security Character Security Character Security Character Security Character
Enter Letters (No Spaces) *